INSTALLATION INSTRUCTION
WEEE Number: 80133970
INTRODUCTION
Thank you for selecng and buying V-TAC LED product. V-TAC will serve you the
best. Please read these instrucons carefully before starng the installing and keep
this manual handy for future reference. If you have any other query, please contact
our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best.
LED STEP LIGHT
VT-1172
STRUCTURE & SIZE
Shell
Screw
Screw
LED
Base
Base
Lampshade
Rubber ring
Rubber ring
Rubber pluy
Rubber pluy
INSTALLATION INSTRUCTIONS
• Switch off the power.
• Drill the appropriate holes on the wall. (Picture 1)
• Connect the parts to install the lamp socket. (Picture 2)
• Connect to the electricity (110-220V), install the lampshade, cover the
shell. (Picture 3)
• Switch on the power if the instrucons above are done properly with
no mistakes.
WARRANTY
WARNING
NOTICE
• Risk of shock, hence disconnect at fuse or circuit breaker before installaon
or servicing.
• Suitable for a Maximum use of 10-12 Hours Daily. Usage of product for 24Hours
a day would void the warranty.
• Consult a cerfied technician if you are unsure.
• This is a high-powered LED. As with any light source, direct viewing should
be avoided.
• Note: Although easy to fit, this lamp requires wiring to the main and safety
should only be fied by a qualified electrician.
• Having issued this warning, the company accepts no responsibility for issues
arising for any failures to comply with these clear instrucons.
• The company will not accept any responsibility for any other issues from
improper use of fing of this product as these maers are beyond our control.
• This product is warranty from manufacturing defect only.
• The warranty is valid for 2 years from the date of purchase.
• The warranty does not apply to damage caused by installaon or abnormal
wear and tear.
• The company gives no warranty against damage to any surface due to incorrect
removal and installaon of the product.
In case of any query /issue with the product please reach out to us at [email protected]
