Loading ...
Loading ...
Loading ...
BISSELL.com 7
1. Ensure you are using the
Carpet Nozzle and Brush Roll.
2. Plug machine into a
properly grounded outlet.
3. Turn the machine ON and
OFF by pressing Deep Clean or
Express Clean.
10s
4. Gently place your foot
on the Foot of the machine
and pull back to recline the
machine.
5. Hold the Spray Trigger
for 10 seconds to prime the
system with cleaning solution
Note: When solution is
flowing, bubbles will form at
the edges of the Brush Roll
Nozzle. Holding the trigger
continuously may result in
overwetting your carpet.
6. Make forward and backward
passes based on your selected
cleaning mode. See “Cleaning
Modes & Instructions” below.
When finished, press Deep
Clean or Express clean to turn
unit OFF.
Cleaning Carpets and Area Rugs
Go to support.BISSELL.com for how-to videos and cleaning tips.
Tips Before Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Pretreat stains with BISSELL Pretreat to improve performance on tough, set-in stains..
• Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug
for colorfastness. Don’t use on silk or delicate rugs.
• Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the
brush may result in premature belt failure.
Cleaning Modes & Instructions
Deep Clean Mode
Delivers a deep clean to your
carpet.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
Deep Clean Mode with
Antibacterial Formula
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
• 1 forward
2. Release Spray Trigger
• 1 pass back
Express Clean Mode
Provides a lighter clean that
dries in 1 hour or less.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
Loading ...
Loading ...
Loading ...