Loading ...
Loading ...
Loading ...
NOTE
Make sure that the blade is tightened. When cutting wet
wood, please clean up the dust and debris near the blade
clamp in time.
6.5 REMOVE THE BLADE
1. Lift the blade release clamp and hold.
2. At the same time, pull the blade out.
3. Release the blade release clamp.
6.6 INSTALL THE SHOE
1. Turn the shoe release lever counterclockwise.
2. Push the shoe into the machine.
3. Turn the shoe release lever to original position.
NOTE
Make sure that the shoe is tightened.
6.7 REMOVE THE SHOE
1. Turn the shoe release lever counterclockwise.
2. Pull the shoe from the machine.
3. Turn the shoe release lever to original position.
7 OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
7.1 START THE MACHINE
1. Push the lock-out button to the left side to unlock the
switch trigger.
2. Pull the switch trigger.
WARNING
Before you use the machine, wait until the blade gets to
fully speed.
7.2 STOP THE MACHINE
1. Release the switch trigger.
7.3 OPERATE THE MACHINE
1. Clamp the work piece.
2. Rest the front shoe of the saw on the work piece.
3. Start the saw on the work piece.
NOTE
Make sure that the blade is not contacting the work piece.
Flush cutting
1. The compact design of the machine permits close cutting
to floors, corners and other difficult areas.
2. To maximize flush cutting capabilities, insert the blade
shaft into the blade clamp with the teeth of the blade
facing up.
3. Turn the saw upside down so you are as close to the work
surface as possible.
8
English
EN
Loading ...
Loading ...
Loading ...