Loading ...
Loading ...
Loading ...
#
Headlight Bulb
1.
Remove the headlight bolts from the
headlight case.
2.
Gently pull the lower end of the headlight
forward and remove the headlight.
3.
Disconnect the connector.
4.
Remove the seat rubber.
5.
Unhook the pin and remove the bulb.
6.
Install a new bulb and parts in the reverse
order of removal.
u Install the seat rubber with its TOP
mark facing up.
7.
Tighten the headlight bolts.
Torque: 3.0 lbf·ft (4.1 N·m, 0.4 kgf·m)
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.
20180808102925_31MJA6100_enu_BOOK Page 102 Wednesday, August 08 2018 10:36:26 JST
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
99
Continued
Headlight bolts
Connector
Headlight
Seat rubber
TOP mark
Pin
Bulb
Loading ...
Loading ...
Loading ...