Loading ...
Loading ...
Loading ...
EN
©2018 Hestan Commercial Corporation
21
LIGHTING INSTRUCTIONS
Hestan Side Burners feature a spark-ignition system with flame-sensing technology which will
relight the flame should it go out.
The Side Burner can also be manually lit should that become necessary.
LIGHTING SIDE BURNERS
1. Read Use & Care Manual before lighting. Remove cover during lighting.
2. Stand as far away as possible when lighting.
3. Push and turn selected knob to “HIGH” position. Igniter will spark until flame is established.
4. Once lit, turn knob to desired flame setting. If spark does not occur, check electrical supply.
5. If burner does not light in 5 seconds, turn knob to “OFF” and wait 5 minutes before re-
lighting.
6. If burner fails to light, see USE & CARE MANUAL for match lighting instructions.
Note: The flame-sensing technology of the spark igniter will repeatedly spark (clicking sound)
until a flame is established. If you experience nuisance sparking during normal operation of the
burner, see the TROUBLESHOOTING section of this manual.
MATCH LIGHTING INSTRUCTIONS
If a burner will not light after several attempts, it can be lit with a match. When attempting to
light a burner with a match, be sure you selected the correct control knob for that burner. Keep
your face away as far as possible, and pass the lit match through the openings of the cooking
grates and position near the burner ports. Push and turn the control knob to “HIGH” until the
burner lights. Repeat this procedure for each burner if necessary. If the burner does not light in
5 seconds, turn the control knob to “OFF” and wait 5 minutes before trying again. If the burner
will not light after several attempts, see the TROUBLESHOOTING section of this manual.
Loading ...
Loading ...
Loading ...