Loading ...
Loading ...
Loading ...
9
English
Power (A) The unit powers ON and OFF by pressing the POWER
button. Lights on the unit’s control panel indicate the power is ON.
Fan Speed (B) The fan speed can be adjusted by pressing the
SPEED button. Press the button to switch between the unit’s speed
settings. Lights on the unit’s control panel indicate the selected
speed setting.
Timer (C) The unit has an automatic timer to turn the unit OFF at
intervals of 1, 2, 4 or 8 hours. To set the timer, turn the unit on and
select desired speed. Press the timer button until the desired run
time light is illuminated. The unit will continue to run until that
amount of time has expired.
Remote Control This unit comes with a remote control. The
remote control functions are the same as the control panel on
the unit. The remote requires a line-of-sight path to allow for the
signal to be received by the unit. Position the unit so the receiver
lens (located above the Vornado logo) is visible from the remote
Controls
control. The remote control can be stored with the Tower Circulator
using the magnetic bowl-shaped cradle located on the top of the
product.
Remote Control Battery The remote control comes with a 3 Volt
lithium coin cell battery (CR2032). To install, remove the battery
cover on the bottom of the remote control. If necessary, clean
the battery contacts and also those of the device prior to battery
installation. Remove any plastic protection from the battery
and place it in the remote with the + side facing out. Ensure
the batteries are installed correctly with regard to polarity. Then
reposition the cover onto the bottom of the remote. If your remote
does not work, please try replacing with a new 3 Volt CR2032
battery, taking care to always use the correct size and grade of
battery for this product.
Note: Remove the battery from the remote control when not in use
for an extended period of time and always remove dead batteries
immediately and replace with fresh. Do not store dead battery in
remote.
1
4
3
2
A
B
C
Loading ...
Loading ...
Loading ...