Loading ...
Loading ...
Loading ...
SET UP & USE
Page 11
Fig. 9
4h HI
2h MED
1h LOW
ON/SPEED
OFF
TIMER
CONTROL PANEL (Fig. 9)
ON/SPEED/OFF
The key serves two purposes. To turn fan ON and OFF and to set desired speed.
Press key to turn fan ON and you are at LOW speed. Press again and it will move to
MEDIUM speed. Press again and it will move to HIGH speed. Press again and the fan
will turn OFF. Speed settings are confirmed by LED indicator light.
TIMER
When this key is touched with fan ON, the auto shuto timer can be set to either
1, 2 or 4 hours and the corresponding LED indicator light will illuminate. If the LED
indicator light is not on, the fan will run continuously.
OSCILLATION CONTROL
To make the fan oscillate, press down the clutch knob located on the top of the motor
housing. To resume directional airflow, pull the clutch knob up to its initial position.
TILT ADJUSTING
To adjust the air flow upward or downward, push the grill section lightly to the
desired direction.
HEIGHT ADJUSTING
The height of the fan can be adjusted by loosening the height adjustment ring.
Carefully raise or lower to desired height and re-tighten the height adjustment ring.
Loading ...
Loading ...
Loading ...