Loading ...
Loading ...
Loading ...
28 EN
Restore the default announcement
1
Select [Menu] > [Answ. Machine] >
[Announcement], then press [OK] to
confirm.
2
Select [Record also] or [Answer only],
then press [OK] to confirm.
3
Select [Use default], then press [OK] to
confirm.
The default announcement is restored.
Incoming messages
Each message can be up to 3 minutes long. When
you receive new messages, the new message
indicator flashes on the answering machine and
the handset.
Note
• If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to
the caller directly.
• If the memory is full, the answering machine
switches to [Answer only] automatically. Delete
old messages to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
• To start/stop listening, press .
• To adjust the volume, press .
• To play the previous message/replay the
current message, press .
• To play the next message, press .
• To delete the current message, press .
Note
• No deleted messages can be recovered.
From the handset
You can listen to the incoming messages in the
sequence they are recorded.
• If there are new messages, press to
listen. If there is no new message, press ,
then [OK] to listen to old messages.
• Select [Menu] > [Answ. Machine] > [Play],
then press [OK] to confirm.
New messages start playing. Old
messages start playing if there is no
new message.
• Press [Back] to stop listening.
• Press [OK] to enter the options menu.
• Press to increase/decrease
the volume.
Delete an incoming message
From the base
Press when you listen to the message.
The curent message is deleted.
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to confirm.
The curent message is deleted.
Delete all old incoming messages
Press and hold on the base station in standby
mode.
All old messages are permanently deleted.
From the handset
1
Select [Menu] > [Answ. Machine] >
[Delete all], then press [OK] to confirm.
Loading ...
Loading ...
Loading ...