Whirlpool WED7990XG User Manual

Loading ...

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

If you experience

Possible Causes

Solution

Clean lint screen. Check for air movement.

Lint on load

Is the lint screen clogged?

Cycle time too short

The load may not be contacting the sensor strips. Level the

dryer.

Use Timed Dry for very small loads. Change the dryness level

setting on Automatic Cycles.

Increasing or decreasing the dryness level will change the

amount of drying time in a cycle. If loads are consistently ending

too early, see also Changing the Automatic Dry Default Settings.

Is the automatic cycle ending early?

Were laundry items removed from

the dryer before the end of the

cycle.

Allow the Cool Down cycle to nish before removing laundry

from dryer. All cycles are cooled slowly to reduced wrinkling

and make it easier to handle. Items removed before Cool Down

may feel very warm.

Was a high temperature cycle used,

or was a separate temperature

control set on high.

Select a lower temperature, and use an automatic drying cycle.

These cycles sense the temperature or the moisture level in the

load and shut off when the load reaches the selected dryness.

This reduces overdrying.

Load is too hot

Loading ...

Whirlpool WED7990XG laundry