Fulgor Milano F6PGR366S2 Gas Range

Use & Care Manual - Page 30

For F6PGR366S2.

PDF File Manual, 96 pages, Read Online | Download pdf file

F6PGR366S2 photo
Loading ...
Loading ...
Loading ...
EN
26
18 - Cleaning the Cooktop
The entire Cooktop can be safely cleaned by wiping with a
soapy sponge, then rinsing and drying. If stubborn soil remains,
follow the recommended cleaning methods below.
ATTENTION
Before cleaning, be certain the burners are turned off and
the grates are cool.
Always use the mildest cleaner that will do the job. Use
clean, soft cloths, sponges or paper towels.
Rub stainless steel finishes in the direction of the grain.
Wipe area dry to avoid water marks.
Do not clean removable cooktop parts in any selfcleaning
oven.
After cleaning, place all parts in their proper positions
before using cooktop.
The cleaners recommended below and on the following page
indicate cleaner types and do not constitute an endorsement of
a particular brand.
Use all products according to package directions.
CLEANING THE COOKTOP
Cooktop Part / Material Suggested Cleaners
Parts and materials Suggested cleaners Suggestions/Reminders
Burner base
(Cast aluminium)
Damp cloth. Keep the gas injector area free of cleaning
agents and any other material from entering
the injector orifice.
Gas spreader
(Cast aluminium)
Detergent and hot water; rinse and dry.
Stiff nylon bristle-toothbrush to clean port
openings.
Abrasive cleansers: Revere ware® metal
polish. Following package direction Use
Brillo® or S.O.S.® pads.
Rinse and dry.
Rub lightly, in a circular motion.
Aluminium cleaners may dull the surface.
To clean port opening, use a tooth brush or
straightened paper clip. Take care not to
damage / augment the shape of the ports.
Gas spreader
(Brass)
Wash them in hot soapy water, rinse, and
dry.
Use a stiff nylon brush or straight-ended
paper clip to clear the notches of a flame
spreader.
Rub lightly, in a circular motion.
Brass cleaners may dull the surface.
To clean port opening, use a tooth brush or
straightened paper clip.
Burner cap and grate
(Porcelain enamel on cast iron)
Non abrasive cleaners: Hot water and
detergent, Fantastic, Formula 409. Rinse and
dry immediately.
Mild abrasive cleaners: Bon Ami® and Soft
Scrub®.
Abrasive cleaners for stubborn stains: soap-
filled steel wool pad.
The grates are heavy; use care when lifting.
Place on a protected surface.
Blisters/crazing/chips are common due to
the extreme temperatures on grate fingers
and rapid temperature changes.
Acidic and sugar-laden spills deteriorate the
enamel. Remove soil immediately.
Abrasive cleaners, used too vigorously or too
often, can eventually mar the enamel.
...
Loading ...
Loading ...
Loading ...