Loading ...
Loading ...
Loading ...
Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use.
Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.
HEATER CONTROL PANEL
The control switch positions are:
● Minimum heating
●● Medium heating
●●● Maximum heating
THERMOSTATIC CONTROL
• Rotate thermostat knob clockwise until you
reach the maximum position.
• When the room reaches a temperature that
is comfortable for you, slowly turn the knob
anti-clockwise until the heater just turns off
(you will hear a click).
• The heater will now cycle on and off to maintain
the comfort level you have set.
• Take note of this setting position for future use.
Loading ...
Loading ...
Loading ...