Loading ...
Loading ...
Loading ...
QUICK START GUIDE
u-line.com
Wine Storage Options
WINE RACK BOTTLE POSITION
Specially designed horizontal wine racks properly position
the bottles so the wine remains in contact with the cork,
which ensures the cork does not become dry.
Racks are designed to accommodate typical 750ml wine
bottles as follows:
SLIDE AND SECURE STORAGE BIN ADJUSTMENT
Removal
1. Empty and remove bin.
2. Firmly grasp both sides of storage bin frame and lift
slot.
3. Pull frame towards you until all pins are clear of the
slots. If only repositioning the frame, do not remove
completely - go to “Storage Bin Installation” Step 2.
4. Slightly tilt one side. Gently pull frame towards you to
remove from unit.
Note: Take care when removing frame to avoid
scratching interior of unit.
5. Once removed, retract the slides.
Note: The slides on the frame have a thin coating
which is used to block moisture and provide
lubrication. Use care when handling.
Installation
1. Insert empty storage bin frame into unit with one side
tilted slightly downward until back pin is between front
and rear rail supports.
2. Tilt frame back to horizontal and line up 2 back pins
with rear rail support. Line up left side of frame with
rear and front rail support. Continue inserting frame
until both pins engage. The front will set down slightly
and lock into place. Repeat on right side.
3. Fully extend frame, position bin over frame and lower
Slide and Secure Storage Bins
inserts may be removed when storing produce or other
Clean the storage bins with soap and water.
7 Bottles
Center
the pin
Center
the pins
Front Pin
Back Pin
16
Loading ...
Loading ...