Loading ...
Loading ...
Loading ...
E-18
Listening to Bluetooth enabled devices (continued)
Indicators:
Indicator Condition Bluetooth status
Blinks In waiting or pairing mode
Lights up Connected
No indication Unconnected
However, the indication status is not displayed during
standby mode.
Pairing with other Bluetooth source devices
1 Press the POWER ON/STANDBY button to turn the
power on.
2 Press the INPUT button (sound bar) repeatedly or
(Bluetooth) button (remote control) to select Bluetooth
function. “BLUETOOTH” appears on the display.
3 Sound bar operation: Press
PAIRING
button.
Remote control operation: Press
and hold the
PAIRING button for 3 seconds or more.
“START PAIRING” appears on the display. The unit is
now in pairing mode and is ready to be paired with
other Bluetooth source device.
4 Perform pairing procedure on the source device to
detect this unit. “HT-SB602 SHARP” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual for
details).
Notes:
Place the devices to be paired within 3 feet (1 meter)
of each other when pairing.
Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating manual
for details.
5 Select “
HT-SB602
SHARP” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 “CONNECTED” appears on the display once the
unit is successfully paired with the source device.
(Pairing information is now memorized in the unit.)
Some audio source devices may connect with the unit
automatically after pairing is completed, otherwise
follow the instructions in the source device operating
manual to start connection.
7 Press the play button on sound bar, remote control or
source device to start Bluetooth streaming playback.
Notes:
If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the
same 2.4 GHz frequency near the system some sound
interruption may be heard.
The transmission distance of the wireless signal
between the device and the sound bar is about 10
m (32 ‘), but may vary depending on your operating
environment. If a steel concrete or metallic wall is
between the device and the sound bar, the system may
not operate at all, because the wireless signal cannot
penetrate metal.
If this unit or the source device is turned off before
Bluetooth connection is completed, pairing will not
be completed and the pairing information will not be
memorized. Repeat step 1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5 for each
device. This unit can be paired to a maximum of 8
devices. If subsequent device is paired, the oldest device
paired, will be deleted and replaced with the new one.
Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
Listening to the sound
Check that:
The source device Bluetooth functionality is ON.
Pairing of this unit and the source device is completed.
Unit is in connected mode.
1 Press the POWER ON/STANDBY button to turn the
power on.
2 Press the FUNCTION button to select Bluetooth
function.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press the Bluetooth
/
button.
Notes:
For various Bluetooth operations, refer “NFC
connection for audio playback” on page 17.
If the source device has an extra bass function or
equalizer function, set them to off to avoid sound
distortion.
Note:
Make the Bluetooth connection again if the source device
is not turned on, or its Bluetooth functionality is off or is
in sleep mode.
To disconnect the Bluetooth device
Perform any of the followings.
– Disconnect the Bluetooth connection on the audio source
device. Refer the operating manual supplied with the
device.
– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
Auto power on
During Standby mode, when music is played from your
device, the unit will automatically power on when the
Bluetooth connection has been set up between the sound
bar and your device. They remain connected if there is no
HDMI connection.
Note:
This function is not applicable during Demonstration mode
off.
Loading ...
Loading ...
Loading ...