Loading ...
Loading ...
Loading ...
14
©
2017 DJI All Rights Reserved.
Connection
1. Use the Antenna Cables to connect the antennas on the Air System. The Master Antenna
connects to the Ground System’s ANT1 port, and the Slave Antenna connects to the ANT2
port. Make sure the location information for D-RTK in DJI Assistant 2 matches the actual
locations. The antenna on the aircraft’s left side connects to the ANT2 port, and the right side
connects to the ANT1 port by default in DJI Assistant 2.
2. Attach the DATALINK PRO Mobile Station’s Antennas and use the clips to make the cables in
stay place.
3. Connect the Air System CAN/UART port to the DATALINK PRO Mobile Station CAN/UART
port with an 8-pin Cable.
4. Connect the Air System CAN1 port to any CAN1 port on the A3 ight controller with a 4-pin
CAN Cable.
5. Connect the Air System POWER port to the power port on the aircraft with an Air System
Power Cable I.
M1
M4
Loading ...