Loading ...
Loading ...
Loading ...
10
Descaling
Minerals, lime and calcium found in hard-water areas can accumulate and affect the operation of your Kettle.
Depending on water conditions and frequency of use, your Kettle should be cleaned once a month with
distilled vinegar or fresh lemon juice to remove scale.
1. Before cleaning your Kettle, make sure the power base is unplugged and the Kettle is cool.
2. Fill the Kettle with 1 part white vinegar or lemon juice to 3 parts cold water.
3. Allow the lled Kettle to stand for 1 hour; then bring the Kettle contents to a boil.
4. Empty the Kettle, rinse thoroughly, then repeat this process 1 to 3 times.
5. After decalcifying, rinse the Kettle thoroughly then re-ll with fresh cold water.
6. Bring clean water to a boil 2 or 3 times using cold water to rinse any residual acid taste.
7. Unplug the Kettle power base from the wall outlet.
WARNING:
• To avoid personal injury, always use extreme caution when handling hot water.
• Do not touch any Kettle surface during and after use.
• Never lift the Kettle lid when boiling water.
Storing Instructions
1. Never store the Kettle while the power base is still plugged in.
2. Unplug the Kettle and allow it to cool.
3. Store the Kettle with lid in place.
4. Never wrap cord tightly around the power base. Never place any stress on cord, especially where the
cord enters the power base, as this could cause the cord to fray and break.
5. Store Kettle and power base in its box or in a cool, dry place.
Troubleshooting
Problem Cause Solution
The Kettle will not begin to heat. Kettle has boiled dry.
Auto Dry Protection device has
been activated.
Add water to the Kettle.
Kettle’s performance has slowed. Mineral, lime, calcium deposits
inKettle.
Descale Kettle.
The control panel interface cannot
detect my action.
User’s hands may be wet. Dry hands on a towel or paper
towel prior to using the kettle’s
control panel interface.
Loading ...
Loading ...
Loading ...