Loading ...
Loading ...
Loading ...
9
Figure 12
Figure 11
Figure 13
Figure 14
Figure 15
GRILL ASSEMBLY
Grill Lines
Grill
Mounting
Screw
Top Tabs
14a
Motor
Notch
Fan Blade
Note: The grill ring may be attached to the rear grill for
shipping purposes. If so, remove the grill ring by loosening
the grill ring screw.
1. Remove the four rear grill mounting screws from the
motor housing. Figure 11.
2. Make sure that the rear grill is positioned so that
three of the grill lines are completely between the top
the back of the grill to the four screw holes on the
front of the motor.
3.
partially install the four grill mounting screws.
Tighten all four screws. Figure 13.
Note: One of the grill mounting screws will have a star
washer on it, for grounding purposes. The other 3 screws
will not have a washer.
4. Loosen the screw on the back of the blade assembly.
Figure 14a. Slide the blade assembly onto the
motor shaft. Figure 14.
5. Tighten the screw on the blade assembly to secure it
to the motor. Make sure that the end of the screw is
positioned within the notch on the shaft. Figure 15.
Caution: Ensure when tightening the screw on the back
of the fan blade, you tighten it on the flat part of the
motor shaft.
1
2
3
61902-01 R20141230
tabs, Figure 12. Then place the rear grill against
To attach the rear grill to the motor housing
the motor housing, and line up the four tabs on
Loading ...
Loading ...
Loading ...