Loading ...
Loading ...
Loading ...
−
＋−
−
−
To adjust the sound, push the
AUDIO button, then enter the sound
grid by touching the SOUND icon on
the display.
You can use the instrument panel
brightness control buttons to adjust
the illumination of the audio system
(see page ). The audio system
illuminates when the parking lights
are on, even if the radio is off.
To adjust the treble
and bass, touch or on each side
of the treble or bass adjustment bar,
or move the joystick. The adjustment
bar shows you the current setting.
These modes adjust
the strength of the sound coming
from each speaker. Left/Right
balance adjusts the side-to-side
strength, while Front/Rear fader
adjusts the front-to-back strength.
To adjust the left/right balance,
touch the ‘‘L’’ or ‘‘R’’ icon, or move
the joystick. To adjust the front/rear
fader, touch the ‘‘FR’’ or ‘‘RR’’ icon,
or move the joystick.
The SVC
mode controls the volume based on
vehicle speed. The faster you go, the
louder the audio volume becomes.
As you slow down, the audio volume
decreases.
The default setting is Mid. If you feel
the sound is too loud, choose low. If
you feel the sound is too quiet,
choose Hi.
To see the audio display when you
are finished adjusting the sound,
wait 5 seconds.
74
Adjusting the Sound
Playing the Radio (Vehicles with Navigation System)
Audio System Lighting
Treble/Bass
Left/Right Balance and Front/
Rear Fader
Speed-sensitive volume
compensation (SVC)
124
SOUND ICON
Main Menu
Table of Contents
s
t
Main Menu
▲
▼
Loading ...
Loading ...
Loading ...