Loading ...
Loading ...
Loading ...
SPECIFICATIONS
CADR
Applicable Area
HEPA Filter Lifetime
Noise Level
Anion Density
Power Supply
Related Power
Standby Power
Operating TEMP
Ozone Density (ETL Tested)
152CFM (260 m³/h)
355sq.ft. (33m²) max.
> 6 months
< 49dB
20*10^6 pcs/cm³ (1.22*10^6 pcs/in³)
AC 120V, 60Hz US. CA.
50W
< 0.8W
-10°C~55°C (14°F~131°F)
0ppmv
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT:
Please read and comply with all of the instructions and warnings in the manual before using.
Failure to comply with the instructions and warnings provided herein may result in inaccurate results
and/or damage to the product itself.
General Safety
Only use this air purifier as described in this manual.
• Ensure the plug fits properly into an AC power outlet.
• When not being used, turn the air purifier off and disconnect it from its power source by unplugging
from the electrical outlet.
• DO NOT operate the unit if its cord or plug is damaged. It may result in damage to the unit or injury.
It must be replaced by the manufacturer or other qualified person so as to avoid all risks.
4
OZONE DENSITY about HEPA AIR PURIFIER
This product complies with the maximum allowable concentration of ozone of 0.050 parts per million
by volume (ppmv) in a 24-hour period.
The Health Canada Guideline 2010 recommends that the maximum exposure limit, based on an
averaging time of 8 hours, is 0.020 ppmv or less when tested in a sealed, controlled room
approximately 30 m³.
COMFORMS TO UL STD.867
CERTIFIED TO CSA STD.C22.2 NO.187
5012499
Loading ...
Loading ...
Loading ...