Loading ...
Loading ...
Loading ...
Steps For Gettin’ Your Grind On
IMPORTANT: Before grinding for the rst time, give my lid, body and container a good cleaning
(see ‘Cleaning Your Coffee Grinder’ section for directions). Then dry me thoroughly to ensure
I’m so fresh and so clean.
WARNING: Avoid contact with my moving parts.
1. Remove the lid from the base of the grinder and add beans to the grinder well.
2. Do not overll.
3. Place the lid securely onto the grinder base.
4. Plug the power cord into a standard 120-volt outlet.
5. Press and hold the pulse button to begin grinding.
6. Grind beans for no longer than 40-50 seconds until beans are ground to desired consistency.
Release pulse button to stop the blades from rotating and grinding the beans. Average grinding
time should take about 15 seconds.
7. Pour ground coffee into Lid, coffee lter, etc.
8. Measure desired coffee bean amount and brew.
9. Unplug from the outlet when product is not in use or left unattended.
Cleaning Your Coffee Grinder
1. Ensure the appliance has been unplugged from the electrical outlet.
2. Wash Lid in warm, soapy water. Then rinse and dry thoroughly.
3. Wipe the inside of the Stainless Steel housing and Lid with a damp paper towel. Be very careful
when cleaning close to the Stainless Steel blades as they are extremely sharp.
4. Dry completely.
5. Store away from reach of children.
WARNING: Always unplug the product and allow it to cool before cleaning or storing it.
WARNING: Do not place any part of the product in a dishwasher.
WARNING: Avoid contact with moving parts.
Read Me Before Using
ATTENTION: First use may cause a slight odor or small smoking upon heating; this is
normal. This is a result of the heating element chemical reaction upon rst use.
WARNING: Do not hold down the pulse button for more than one (1) minute at a time
to avoid overheating.
NOTE: Lid safety lock does not allow the Grinder to operate unless the lid is correctly
in its place.
NOTE: Grinding time should be about (40-50) seconds, however the grinding time may
vary depending on the quantity and quality of coffee beans and the desired coarseness.
WARNING: Stainless Steel blades are sharp. Handle with care and do not put any body
part in or near blades when operating.
Warranty Info
Special Instructions
Vremi offers a 12-month warranty on all of our products purchased new and unused from
Vremi LLC or an authorized reseller, with an original proof of purchase and where a defect has
arisen, wholly or substantially, as a result of faulty manufacturing, parts or workmanship during
the Warranty Period. The warranty does not apply where damage is caused by other factors,
including without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident or
failure to follow operating instructions; (c) exposure to liquid or inltration of foreign particles;
(d) servicing or modication of the product other than by Vremi. These are our general terms
for the warranty service, but we always urge our customers to reach out to us with any issue,
regardless of warranty terms. If you experience an issue with a Vremi product, please contact
us at support@vremi.com, and we will do our best to resolve it for you.
Avoid contact with moving parts.
Check the grinder container for the presence of objects before using.
Use this appliance to grind roasted coffee beans only. Nuts, spices or unroasted beans may
dull the blade.
A short power supply cord is provided to reduce the risk of becoming entangled in or tripping
over a longer cord. An extension cord is not recommended for use with this product, but if
one must be used, the marked electrical rating must be at least as great as that of the product.
If the product is of a 3-prong grounding type, the extension cord must be a grounding-type
3-wire cord. Arrange the extension cord so that it will not drape over the countertop or
tabletop where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug (one blade is wider than the other
blade) to reduce the risk of electrical shock. This is a safety feature. The plug will t into a
polarized outlet only one way. If you are unable to insert the plug into the electrical outlet, try
reversing the plug. If the plug still does not t, contact a qualied electrician. Never use the
plug with an extension cord unless you can fully insert the plug into the extension cord. Do not
alter the plug. Do not attempt to defeat the safety purpose of the polarized plug.
E-Waste Recycling
This marking indicates that this item should not be thrown out with other household wastes.
To prevent possible harm to the environment or human health from electronic waste disposal,
recycle this item responsibly. For assistance on proper disposal, call 1-800-8-BATTERY.
5000458
Conforms to UL STD.982
Loading ...
Loading ...