Loading ...
Loading ...
Loading ...
6
Copyright 2018 Secura, Inc. All rights reserved. www.thesecura.com
Operation - Heating chocolate milk (will produce a small amount of froth)
Fig. 7 Open the lid of the appliance.
Fig. 8 Insert the frothing whisk into the axle in the milk jug.
Fig. 9 Add milk into the milk jug. Do not add more milk than the maximum line (250 ml),
which is marked inside the milk jug.
Fig. 10 Add no more than 50 g chocolate/cocoa powder into the milk jug.
( Note: The ratio of the chocolate/cocoa to the milk is 1 : 4. This means when you
add 50 g chocolate, you should add 200- 250 ml milk).
Fig. 11 Place the lid on top of the milk jug.
Fig. 12 Put the milk jug onto the power base and plug the appliance into the electrical outlet.
Fig. 13 Press the selector switch twice, the indicator light will illuminate white and fl ash
about 3 seconds. After 3 seconds, the indicator light will stop fl ashing and the
appliance will begin to operate. The cycle will take 300 to 420 seconds, depending
on the starting temperature and amount of the milk and chocolate/cocoa. The
indicator light and the appliance will turn off automatically when the cycle is complete,
indicating the heated chocolate milk is ready.
Note: If the frothing whisk becomes stuck by the chocolate powder during operation, it will
resume normal operation automatically in 2 seconds.
OVERHEATING AND SAFETY SHUT-OFF
If there is no liquid in the jug, or no jug on the power base, a safety shut-off will automatically
disconnect the power supply should the heating plate overheat. This safety mechanism can
protect the milk frother from being damaged by overheating.
Loading ...
Loading ...
Loading ...