Loading ...
Loading ...
Loading ...
3 Get started
Charge the battery
Charging
Note
Before you use your earphones for the rst
time, place the earphones in the charging box
and charge the battery for 2 hours for
optimum battery capacity and lifetime.
Use only the original USB-C charging cable to
avoid any damage.
Finish your call before charging the
earphones, as connecting the earphones for
charging will power the earphones o.
Connect one end of the USB cable into
the charging box, and another end into
the power source.
• Charging process is veried by the
LED light on the front panel.
• When the charging box is fully
charged, the light goes on.
Tip
The charging box serves as a portable backup
battery for charging the earphones. When the
charging box is fully charged, it supports 2
times full recharge cycle for the earphones.
Normally, a full charge takes 2 hours (for the
earphones or charging box) by USB cable.
The LED on both earphones
ash in white & blue alternately.
The charging box starts charging.
Pair the earphones with
your Bluetooth device
for the rst time
Open the top cover from charging
box.
Make sure that the earphones is
fully charged and powered o.
The earphones are now in
pairing mode and is ready to
pair with a Bluetooth device
(e.g. a mobile phone)
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earphones with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
After powering on, if the earphones cannot
nd any previously connected Bluetooth
device, it will automatically switch to pairing
mode.
Loading ...
Loading ...
Loading ...