Loading ...
Loading ...
Loading ...
16
Michi X5 Stereo Integrated Amplifier
Bass: Bass setting is enabled when Audio Mode is set to Tone Enabled.
Options include: +10 to -10 (Default 0).
Treble: Treble setting is enabled when Audio Mode is set to Tone Enabled.
Options include: +10 to -10 (Default 0).
Press the SETUP button
B
on the remote control to exit the setup menu or
select “Back” on the OSD to return to the main menu.
Network Configuration
Static IP
Disabled
DHCP
NETWORK
SETUP
Status
Renew IP Address
Network Standby
IP Address
Subnet Mask
Network Type
This Network menu in the Setup menu, provides the following options, selected
by placing the highlight on the desired line using the
T
/
D
arrow buttons
and pressing the Enter
K
button. This action displays the right side options
allowing changes. Change the options using the
T
/
D
buttons and press
the Enter
K
button to confirm.
Status: If the network is properly configured and attached to the network then
“Connected” will be displayed. If the network is not properly configured or not
connected to a network, “Disconnected“ will be displayed.
Network Type: In most systems, set the IP ADDRESS MODE to DHCP.
This setting will allow your router to assign an IP address to the Amplifier
automatically. If your network uses fixed IP addresses, set the IP ADDRESS
MODE to Static. To disable the IP connection set this option to DISABLED.
Options include: DHCP (Default), Static IP, Disabled.
Renew IP Address: Disabled if Network Type is Static or Disabled. If Network
Type is DHCP then select Yes and press the Enter
K
button to renew the IP
address.
Network Standby: When set to Enabled the unit will maintain the Ethernet
IP connection even in Standby Mode allowing the unit to be powered on via
IP. If Disabled the unit will not power on from the IP connection and must use
either the front panel, IR remote or RS232 to power on the unit.
Options Include: Disabled (Default), Enabled
NOTE When Network Standby is enabled the unit will consume additional
power.
IP Address/Subnet Mask/Gateway/DNS: Disabled if Network Type is DHCP
or Disabled. If STATIC mode is selected you must configure all settings for the
network including IP Address, Subnet Mask, Gateway and DNS Server. Press the
Enter
K
button to activate the first digit in the line you want to change, then
use the
T
/
D
arrow buttons to adjust the values and press the Enter
K
button to cycle to the next digit. When the proper IP information is configured
press the Enter
K
button to move the cursor back to the previous menu and
accept the settings. After entering the STATIC IP address information the
network will be tested and connection status reported.
NOTE: For more information regarding network connection please
contact your authorized Michi dealer.
NOTE: A network connection is not required for the Amplifier to operate.
Press the SETUP
B
button on the remote control to exit the setup menu or
select Back to return to the main menu.
Audio Configuration
When Selected
AUDIO
SETUP
Power On Max Volume
PC-USB Option
Bluetooth LED
Always on
Phono Stage
Balance
This Audio menu in the Setup menu, provides the following options, selected
by placing the highlight on the desired line using the
T
/
D
arrow buttons
and pressing the Enter
K
button. This action displays the right side options
allowing changes. Change the options using the
T
/
D
arrow buttons and
press the Enter
K
button to confirm.
Bluetooth LED: The Bluetooth LED will be powered on only when Bluetooth is
the selected input or will always be powered on when the unit is ON.
Options include: Always on (Default), On When Selected
Power on Max Volume: This sets the max volume level for when the unit
powers on to reduce the chance of the previous listening session set too loud.
Options include: Max 30 - Max 90, Max 50(Default).
PC-USB Mode: Configures PC-USB mode to Audio Class 1.0 or Audio Class
2.0. Default is Audio Class 1.0.
Options include: Audio Class 1.0 (Default), Audio Class 2.0.
Phono Stage: Relay selectable turntable source input type of Moving Magnet
or Moving Coil cartridge.
Options include: Moving Magnet (Default), Moving Coil
Balance: The Balance Setting adjusts the left-to-right balance of the sound
output. The factory default is the center position or “0”. The value can change
from -10 to +10.
Signal Sense: Monitors if an audio signal is present on the configured
Signal Sense input. The Amplifier monitors the data stream to determine if
there is audio. If there is no audio detected for 10 minutes, the Amplifier will
enter Signal Sense Power Mode. When in Signal Sense Power Mode and the
Loading ...
Loading ...
Loading ...