Loading ...
Loading ...
Loading ...
Impulse Series Camera User Guide
Troubleshooting
Possible picture problems and their solutions
Problem Cause Solution
Repeated spots
or bar pattern
The developer rollers inside
the film door need to be
cleaned.
Open the film door (do not do this
in direct sunlight, when there is film
in the camera).
Clean the developer rollers with a
lint-free cloth dampened with
water, if necessary.
Background to dark The background was either too
far from the subject or beyond
the flash range.
Be sure the lighten/darken
control is in center position.
Place your subject near the
background and keep both within
the applicable flash range.
Impulse - 4 to 10 feet (1.2 to 3m)
Impulse AF - 2 to 14 feet (.6 to
4.25m)
Unsharp picture The subject was too close to
the camera.
Be sure your subject is at least
4 feet (1.2m) from the camera.
9
Loading ...
Loading ...