Loading ...
Loading ...
Loading ...
Kelvinator Air Conditioning unit parts iden cation/operation instructions 5
Operating instructions
1 Front panel
2 Air lter
3 Frame
4 Cabinet
5 Air inlet grille (outdoor side)
6 Air outlet grille
7 Electronic control keypad
8 Power supply cord and plug
9 Remote control
1 Power cord conductors are distinguished according to
colour as follows (see Fig.1)
2 For your safety and protection, this unit is earthed
through the power cord (see Fig.2)
Please contact the manufacturer or its service agent or a
similar qualied person if you want to replace it.
3 Be sure that the unit is being correctly grounded. The
wall outlet (Air-Break Switch) should be provided with
reliable earth wire.
4 The unit should be provided with an individual circuit
an
d the circuit breaker/fuse rating should be the same as
that of the power cord and wall outlet.
Controls
The electronic control keypad will look like one of the
following:
Reverse Cycle Models
Cooling only models
Vent control
The vent control is located above the control keypad.
The operation method is different on different models
(see the followin
gures).
For maximum cooling e
ciency, CLOSE the vent.
This will allow internal air circulation.
CLOSE VENT OPEN
CLOS
E OPEN
close open
To open the vent, set the lever to the right position.
To close it, set the lever in the left position.
Unit parts ide cation
1 2 3
4
5
6
7
8
9
power
cord
A
E
N
Fig. 1
Fig. 2
wall outlet
air break switch
E- earthwire, yellow/green
N- neutral wire, blue
A - active wire, brown
To open the vent, slide the lever to the left. To close it,
slide to the right.
Loading ...
Loading ...
Loading ...