Loading ...
Loading ...
Loading ...
ENGLISH
15
ASSEMBLING AND PREPARING
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
supplied with the wall mount.
NOTE
Disconnect the power cord first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
CAUTION
VESA (A x B) 100 x 100
Standard screw M4
Number of screws 4
Wall mount bracket
(optional)
RW120
A
B
Mounting on a wall
For proper ventilation, allow a clearance of
10 cm (4 inches) on each side and from the wall.
Detailed installation instructions are available from
your dealer, see the optional Tilt Wall Mounting
Bracket Installation and Setup Guide.
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of
the TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it
will not drop.
1
Please, use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use a screw longer than standard, the TV
might be damaged internally.
3
If you use an improper screw, the product
might be damaged and drop from mounted
position. In this case, LG Electronics is not
responsible for it.
4
Observe the VESA standards with respect to
screw mounting interface dimensions and
mounting screw specifications.
5
Please use VESA standard wall mount pad and
screws. Please use VESA standard as below.
784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw :
Φ
4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm (31.0 inch) and above
10 cm
(4 inches)
10 cm
(4 inches)
10 cm
(4 inches)
10 cm
(4 inches)
Loading ...
Loading ...
Loading ...