Loading ...
Loading ...
Loading ...
23
BATTERY & CHARGER MAINTENANCE
CHECKING BATTERY CAPACITY
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the
batteries capacity level. See chart below:
BATTERY CAPACITY
INDICATOR (BCI) BUTTON
LIGHT METER
Lights
Capacity
The battery is more than 75% capacity
3 Green Lights
The battery is between 35% and 75% capacity 2 Green Lights
The battery is less than 35% capacity
1 Green Light
Lights go out
The battery requires charging immediately
CHARGING PROCEDURE
NOTE: The battery is not shipped fully charged. It is recommended to fully charge before rst use to ensure
that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be
charged at any time.
1. Plug the charger into an AC power outlet.
2. Insert the battery pack into the charger.
This is a diagnostic charger. The Charger LED Lights will illuminate in specic order to
communicate the current battery status. They are as follows:
Charging Fully
Charged
Over
Temperature
Charging
Fault
LED STATUS DESCRIPTION
Blinking Gree harging
Solid Green Fully Charged
Solid Red Over Temperature
Blinking Re harging Fault
n
C
C
d
False Defect Note: When the battery is inserted into the charger, and the status LED ashes,
remove the battery from the charger for 1 minute, then reinsert. If the status LED indicates
normal than the battery pack is good. If the status LED is still blinking, remove the battery pack
and unplug the charger. Wait 1 minute and plug the charger back in and reinsert the battery
pack. If the status LED indicates normal than the battery pack is good. If the status LED is still
blinking then the battery pack is defective and needs to be replaced.
Loading ...
Loading ...
Loading ...