Loading ...
Loading ...
Loading ...
25
DRIP TRAYS
The drip trays located below the grill should be cleaned periodically to prevent buildup of debris.
NOTE: Allow the drip tray to cool before attempting to clean.
IMPORTANT: Do not leave the grill outside during inclement weather unless it is covered (cover sold
separately). Rain water can collect inside the grill, the grill cart or the drip trays if left uncovered. If the drip tray is
not cleaned after use and the grill is left uncovered, the drip tray will fill with water causing grease and water to
spill into the grill cart. We recommend cleaning and the drip tray after every use.
COOKING GRATES
The cooking grates can be cleaned immediately after cooking is completed and after turning off the grill, but
exercise extreme caution because the grates will be very hot if you clean them immediately after cooking. Always
wear a barbecue mitt and scrub the cooking grates with a damp cloth. If the grill is allowed to cool down,
cleaning the grates will be easier if removed from the grill and cleaned with a mild detergent.
HEAT SHEILD
Washing the heat shield after every use is not necessary but periodically it is suggested you wash it in a soap and
warm water solution. Do not clean the heat shield immediately after use of the grill. Allow it to cool. Use a wire
brush to remove stubborn burned on cooking residue. Dry the heat shield thoroughly before you reinstall it in
the cooking insert.
Stainless Steel Care and Maintenance
It is a common misconception that stainless steel will maintain its original factory shine with little help from the
consumer. Unfortunately, this is not true. Stainless steel will not stain, discolor, corrode or rust as fast as other
types of steel, but it is not fully stain or weather proof. If it is not properly maintained, all grades of stainless
steel can face surface discoloration, corrosion and eventually rust. Any stainless steel that is exposed to the
environment will require attention and care throughout its life to ensure that it keeps its shine and structural
integrity.
Cleaning the Stainless Steel and Polishing
1. Allow grill to cool before cleaning/polishing stainless steel. Do not clean or polish your grill’s stainless steel
when the gill is in operation or still hot.
2. To clean the stainless steel, wash off all dirt and debris from the steel with warm water. If you have tough
spots to clean, then a third-party degreaser product can be used.
3. Next, rinse and dry the steel thoroughly with a clean towel. Do not allow the steel to air dry as the standing
water can cause surface discoloration.
4. The last step is to protect to the unit with a good third-party polish. There are several third-party polishes on
the market that will help keep your grill protected from the elements for a longer period of time. Most of
these polishes are toxic, so only use these on the exterior of the grill. Follow instructions provided on any
Care & Maintenance
All cleaning and maintenance should be done only when grill is cool & with the power supply turned
off.
Loading ...
Loading ...
Loading ...