Loading ...
Loading ...
Loading ...
Use
16
3. Remove and wash all the appliance
accessories (see 3 Cleaning and
maintenance).
2.2 Using the cooktop
All the appliance's control and monitoring
devices are located together on the front
panel. The burner controlled by each knob
is shown next to the knob. The appliance is
equipped with an electronic ignition device.
Simply press the knob and turn it counter-
clockwise to the maximum flame symbol,
until the burner lights. If the burner does not
light in the first 15 seconds, turn the knob to
and wait 5 minutes before trying again.
After lighting, keep the knob pressed in for
a few seconds to allow the thermocouple to
heat up. The burner may go out when the
knob is released: in this case, the
thermocouple has not heated up sufficiently.
Wait a few moments and repeat the
operation. Keep the knob pressed in
longer.
Setting flame size
A minimum and maximum flame size can be
set for each burner.
Rapid burner
Dual Flame burner
WARNING
FIRE HAZARD
• For your safety: do not allow the burner
flame to extend beyond the edge of the
pan.
• Turn off all controls when the appliance
is not in use.
In case of an accidental turning off,
a safety device will be tripped,
cutting off the gas supply, even if
the gas tap is open. Return the
knob to and wait at least
5 minutes before lighting it again.
When the outer ring is lit,
regardless of the size of the flame,
the inner ring is also lit. It is not
possible to switch on the outer ring
without the inner one.
Loading ...
Loading ...
Loading ...