Loading ...
Loading ...
Loading ...
15
) Use a screwdriver to take
ut the two screws that go
diagonal cut-out on it,
ve
h
carbon filter. These screws must be fully tightened.
4) After fitting the
arbon filter, the
o The carbon filters should be replaced approximately every three
3
o
through the fixing point and
then lower the carbon filter
over the motor casing hole.
o The corner with the
must be positioned
against the fixing point
(as shown in the abo
picture).
o Retighten the two screws throug the fixing point, into the
c
underneath of the
cooker hood
should appear as
in the drawing
opposite.
o Refit the grease filters.
months, if they show signs of damage, or if you start to notice
that cooking smells are entering the kitchen through the upper
vents.
Loading ...
Loading ...
Loading ...