Loading ...
Loading ...
Loading ...
Operating Instructions
CLEANING AND MAINTENANCE
General
Cleaning and maintenance should be carried out regularly while the appliance is cold especially when cleaning the
enamelled & Stainless steel parts.
Avoid leaving alkaline or acid substances on the surfaces (lemon juice, vinegar etc).
Avoid using acid or chlorine based cleaning products.
Enamelled Parts (only available in some models)
All of the enamelled parts must be washed only with a sponge and soapy water or
non abrasive products.
Burners and Grids
These parts can be removed and cleaned with appropriate products.
After cleaning, the burners and their flame distributors must be well dried and correctly replaced.
It is very important to check that the burner flame distributor (F) and the cap (C) has been correctly positioned (fig.6),
failure to do so can cause serious problems.
Check that the electrode (S) is always clean to ensure trouble free ignition.
Check that the probe (T) is always clean to ensure correct operation of the safety valves (for models with safety device).
Both the probe and ignition plug must be very carefully cleaned.
Loading ...
Loading ...
Loading ...