Loading ...
Loading ...
Loading ...
3 Get started
Charge the battery
Charging case
Headset
Note
•
place the headsets in the charging case and
charge the battery for 3 hours for optimum
battery capacity and lifetime.
• Use only the original USB charging cable to
avoid any damage.
• Finish your call before charging the headset,
as connecting the headset for charging will
Connect one end of the USB cable into
the charging case, and another end into
the power source.
• Charging process is veriĖed by the
blue LED light on the front panel.
• When the charging case is fully
charged, the blue light goes on.
• Charging process is veriĖed by
white LED lights on the earpieces.
• When the headset is fully charged,
Tip
Tip
•
The charging case serves as a portable backup
battery for charging the headset. When the
charging case is fully charged, it supports 3 full
recharge cycle for the headset.
• Normally, a full charge takes 2 hours (for the
headset or charging case).
Pair the headset with
your Bluetooth device at
the Ėrst time
Place the headset in the charging case.
The headset start charging.
Make sure that the headset is fully
charged.
Take both headsets from the
charging case, the headset will
power on automatically, entering
pairing model and Right & Left
headset connected.
here will be a voice "Power on" and a
voice "Pairing". Then, there will be a
voice" Right channel" on right headset
and "Left Channel" on left headset
after paring each other.
The charging case starts charging.
EN
Loading ...
Loading ...
Loading ...