Loading ...
Loading ...
Loading ...
6
Install the water intake hose
Insert the water intake hose
into the water-inlet entrance
on the control panel.
Water intake hose
Water inlet
Change the direction of the drain hoses
Add water as necessary.
The drain hoses in the wash tub when out off factory ,before use the machine,
please screw the drain hose on the drain valve parts , make sure the drain hose
fixing as necessary.
Drain valve parts
2.Install the drain hose
1.Remove the cover
Install the washer legs
1.Carefully tilt the washing machine to the back and install the bottom legs at the
front of the base.Make sure that the legs are installed in place.(Figure 1).
2.Carefully tilt the washing machine to front and install the bottom legs at the back
of the base.Make sure that legs are installed in place.(Figure 2)
On models RTT 21251WSU-19,RTT 2151WS-19.
Bottom legs
Bottom legs
Figure 1 Figure 2
Loading ...
Loading ...
Loading ...