Loading ...
Loading ...
Loading ...
For more info on connecting the TV to your home network,
press
Keywords
and look up
Network, wireless
.
Hue Bridge
In the following step, you will link up the TV with the
Philips
Hue Bridge
.
The TV can only be linked up to one Hue Bridge.
To link the Hue Bridge…
1 - With the TV connected to the network, it will show the
available Hue Bridges. If the TV did not find your Hue Bridge yet,
you can select
Scan again
and press
OK
.
If the TV found the only Hue Bridge you have, select
Next
and
press
OK
.
If you have more than one Hue Bridge available, press
(up) or
(down) to select the Hue Bridge you want to use and then
select
Next
and press
OK
.
2 - After you pressed
OK
, go to the
Philips Hue Bridge
and
press the link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30 seconds. The TV
will confirm if a Hue Bridge is linked to the TV.
3 - On this confirmation, select
OK
and press
OK
.
With the Philips hue bridge linked to the TV, go to page
Hue
bulbs
.
Hue bulbs
In the following step, you will select the
Philips Hue bulbs
that
have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the
Configure Ambilight+hue
menu, select
Hue bulbs
and
press
OK
.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press
OK
.
3 - When you’re done, select the
OK
button and press
OK
.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb
.
Configure bulb
In the following step, you will configure each
Philips Hue bulb
.
To configure each Hue bulb…
1 - Select the bulb name in the
Configure Ambilight+hue
menu
and press
OK
. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight
colour to the bulb. Press
(up) or
(down) to adjust.
3 - Press
(right) to set the distance.
4 - Secondly, indicate the
Distance
between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Press
(up) or
(down) to adjust.
5 - Press
(right) to set the brightness.
6 - Finally, set the
Brightness
of the bulb. Press
(up) or
(down) to adjust.
7 - To stop configuring this bulb, select
OK
and press
OK
.
8 - In the
Configure Ambilight+hue
menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select
Finish
and press
OK
.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press
and select
Setup
>
TV
settings
>
Ambilight
>
Ambilight+hue
> Configure
Ambilight+hue.
Immersion
With
Immersion
, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Ambilight+hue
>
Immersion
and press
OK
.
3 - Press
(up) or
(down) to adjust.
4 - Press
, repeatedly if necessary, to close the menu.
Info
In
View configuration
, you can consult the current
Ambilight+hue configuration. Which network you use, how
many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Ambilight+hue
>
View
configuration
and press
OK
.
3 - Select the item you want to view and press
OK
.
4 - Press
,
repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall Colour
With
Wall Colour
, you can neutralise the influence of a
coloured wall on the Ambilight colours. Select the colour of the
wall behind the TV and the TV will modify the Ambilight colours
to appear as they are intended.
To select the colour of the wall . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Advanced
>
Wall Colour
.
3 - Select the colour sample that matches the colour of the wall
66
Loading ...
Loading ...
Loading ...