Loading ...
Loading ...
Loading ...
14
> Specifications > Advanced Setup > Listening Modes > Network Functions
Troubleshooting Supplementary Information, etc�|
> Basic Manual
■ 5� Equalizer Settings
You can adjust the output volume of the range of each connected speaker. You can adjust
the volume of the different sound ranges for each of the speakers. You can set three
different equalizers in Preset 1 to 3. You can select up to five bands for the Subwoofer and
nine bands for all other speakers.
Setting Item Default Value Setting Details
Front 0 dB After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
Center 0 dB After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
Height 0 dB After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
•
The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Surround 0 dB After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
Surround Back 0 dB After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
•
The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Subwoofer 0 dB After selecting the speaker frequency from
between "25 Hz" and "160 Hz" with the cursors
/
, adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with
/ .
•
This cannot be selected if "No" is set in
"Configuration" - "Subwoofer".
•
The result may not be as expected depending on the input source and listening mode setting.
■ 6� THX Audio
Setting item Default Value Setting Details
Back Speaker
Spacing
>4.0 ft/>1.2 m Select the distance between the surround back
speakers from "<1.0 ft/<0.3 m", "1.0 - 4.0 ft/0.3
- 1.2 m", and ">4.0 ft/>1.2 m".
•
The unit of distance (ft/m) shown is the unit
selected for use in "Distance".
•
The setting cannot be changed if "Zone 2" is
set in "Configuration" - "Zone Speaker" and
Zone 2 is on.
•
If an item cannot be selected even though
connection is correct, check that the settings
in "Configuration" - "Speaker Channels"
matches the number of connected channels.
BGC Off If your listening room layout (for practical or
aesthetic reasons) locates most of the listeners
close to the rear wall, the resulting bass level
can be sufficiently reinforced by the boundary
that the overall sound becomes "boomy".
THX I/S receivers contain a Boundary Gain
Compensation (BGC) feature to improve bass
balance.
"On": When this function is to be used
"Off": When this function is not to be used
•
This cannot be selected if "No" is set in
"Configuration" - "Subwoofer".
Loading ...
Loading ...
Loading ...