Binder MK 56 MK 60-liter dynamic climate chambers for rapid temperature changes

User Manual - Page 163

For MK 56.

PDF File Manual, 163 pages, Read Online | Download pdf file

More photos

1. Safety
- 1.1 Personnel Qualification
- 1.2 Operating manual
- 1.3 Legal considerations
- 1.4 Structure of the safety instructions
- 1.5 Localization / position of safety labels on the chamber
- 1.6 Type plate
- 1.7 General safety instructions on installing and operating the chamber
- 1.8 Intended use
- 1.9 Foreseeable Misuse
- 1.10 Residual Risks
- 1.11 Operating instructions
- 1.12 Measures to prevent accidents
2. Chamber description
- 2.1 Chamber overview
- 2.2 Instrument panel
- 2.3 Lateral control panel
- 2.4 Main power switch (MK 56)
- 2.5 Rear power switch (MK / MKT 115, 240, 720)
- 2.6 Rear chamber view
3. Completeness of delivery, transportation, storage, and installation
- 3.1 Unpacking, and checking equipment and completeness of delivery
- 3.2 Guidelines for safe lifting and transportation
- 3.3 Storage
- 3.4 Location of installation and ambient conditions
4. Installation and connections
- 4.1 Connection of cooling water outlet for water cooling (option for MK 56)
- 4.2 Connection of cooling water inlet for water cooling (option for MK 56)
- 4.3 Installation of the voltage and frequency changer(chambers with voltage and frequency changer)
- 4.4 Electrical connection
  - 4.4.1 Information on connecting the alternating climate chamber
  - 4.4.2 Connecting the voltage and frequency changer (for chambers equipped with a voltage and frequency changer)
5. Functional overview of the MB2 chamber controller
- 5.1 Operating functions in normal display
- 5.2 Display views: Normal display, program display, chart-recorder display
- 5.3 Controller icons overview
- 5.4 Operating modes
- 5.5 Controller menu structure
- 5.6 Principle of controller entries
- 5.7 Performance during and after power failures
- 5.8 Performance when opening the door
6. Start up
- 6.1 Turning on the chamber
- 6.2 Controller settings upon start up
7. Set-point entry in âFixed valueâ operating mode
- 7.1 Set-point entry through the âSetpointsâ menu
- 7.2 Direct setpoint entry via Normal display
- 7.3 Special controller functions via operation lines
8. Timer program: stopwatch function
- 8.1 Starting a timer program
  - 8.1.1 Performance during program delay time
- 8.2 Stopping a running timer program
  - 8.2.1 Pausing a running timer program
  - 8.2.2 Cancelling a running timer program
- 8.3 Performance after the end of the program
9. Time programs
- 9.1 Starting an existing time program
  - 9.1.1 Performance during program delay time
- 9.2 Stopping a running time program
  - 9.2.1 Pausing a running time program
  - 9.2.2 Cancelling a running time program
- 9.3 Performance after the end of the program
- 9.4 Creating a new time program
- 9.5 Program editor: program management
  - 9.5.1 Deleting a time program
- 9.6 Section editor: section management
- 9.7 Value entry for a program section
10. Week programs
- 10.1 Starting an existing week program
- 10.2 Cancelling a running week program
- 10.3 Creating a new week program
- 10.4 Program editor: program management
  - 10.4.1 Deleting a week program
- 10.5 Section editor: section management
- 10.6 Value entry for a program section
11. Notification and alarm functions
- 11.1 Notification and alarm messages overview
  - 11.1.1 Notifications
  - 11.1.2 Alarm messages
- 11.2 State of alarm
- 11.3 Resetting an alarm, list of active alarms
- 11.4 Activating / deactivating the audible alarm (alarm buzzer)
12. Temperature safety devices
- 12.1 Over temperature protective device (class 1)
- 12.2 Overtemperature safety controller class 2
- 12.3 Over/under temperature safety device class 2 (option)
13. User management
- 13.1 Authorization levels and password protection
- 13.2 Log in
- 13.3 Log out
- 13.4 User change
- 13.5 Password assignment and password change
- 13.6 Activation code
14. General controller settings
- 14.1 Selecting the controllerâs menu language
- 14.2 Setting date and time
- 14.3 Selecting the temperature unit
- 14.4 Display configuration
  - 14.4.1 Adapting the display parameters
  - 14.4.2 Touchscreen calibration
- 14.5 Network and communication
- 14.6 USB menu: Data transfer via USB interface
- 14.7 Turning off the interior lighting automatically
15. General information
- 15.1 Service contact page
- 15.2 Current operating parameters
- 15.3 Event list
- 15.4 Technical chamber information
- 15.5 Self-test function (MK 56)
16. Chart recorder display
- 16.1 Views
- 16.2 Setting the parameters
17. Notes on refrigerating operation
18. Anti-condensation protection via operation line
19. Zero-voltage switching outputs via operation lines
20. Options
- 20.1 APT-COMâ¢ 4 Multi Management Software (option)
- 20.2 RS485 interface (option)
- 20.3 Data logger kit (option)
- 20.4 Analog outputs for temperature (option)
- 20.5 Compressed air connection (option)
- 20.6 Compressed air dryer (option)
- 20.7 Water cooling (option)
- 20.8 Object temperature display with flexible Pt 100 temperature sensor (option)
21. Cleaning and decontamination
- 21.1 Cleaning
- 21.2 Decontamination / chemical disinfection
22. Maintenance and service, troubleshooting, repair, testing
- 22.1 General information, personnel qualification
- 22.2 Maintenance intervals, service
- 22.3 Simple troubleshooting
- 22.4 Sending the chamber back to BINDER GmbH
23. Disposal
- 23.1 Disposal of the transport packing
- 23.2 Decommissioning
- 23.3 Disposal of the chamber in the Federal Republic of Germany
- 23.4 Disposal of the chamber in the member states of the EU except for the Federal Republic of Germany
- 23.5 Disposal of the chamber in non-member states of the EU
24. Technical description
- 24.1 Factory calibration and adjustment
- 24.2 Over-current protection
- 24.3 Definition of usable volume
- 24.4 MK (E5) technical data
- 24.5 MKT (E5) technical data
- 24.6 Equipment and options (extract)
- 24.7 Accessories and spare parts (extract)
- 24.8 MK heating-up and cooling-down graphs
- 24.9 MKT heating-up and cooling-down graphs
- 24.10 MK heat compensation
- 24.11 MKT heat compensation
- 24.12 Dimensions
25. Certificates and declarations of conformity
- 25.1 EU Declaration of Conformity for MK
- 25.2 EU Declaration of Conformity for MKT
- 25.3 Certificate for the GS mark of conformity of the âDeutsche Gesetzliche Unfallversicherung e.V.â (German Social Accident Insurance) DGUV
26. Product registration
- 26.1 Registering a BINDER chamber
- 26.2 Multi Management Software APT-COMâ¢ 4 BASIC-Edition
27. Contamination clearance certificate
- 27.1 For chambers located outside the USA and Canada
- 27.2 For chambers located in the USA and Canada
Leere Seite

Loading ...

File type: PDF

File name: 56485566_mk-720.pdf

File size: 9.41 MB

File Language: English

Pages: 163

Author: Binder

File created: 2020-08-18

Published: 2021-08-19

Updated: 2023-05-22

Download File