Loading ...
Loading ...
Loading ...
Installation
26
5 Installation
5.1 Electrical connection
General information
• Check the mains characteristics against
the data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned inside the
appliance. Do not remove this plate for
any reason.
• Make sure that the plug and socket are
of the same type.
• The plug must always be accessible
when the appliance is installed.
• Leave the appliance standing vertically
for at least two hours before turning it on
for the first time.
• If it is necessary to replace the power
cable, this must be performed by an
authorized technician from Technical
Support Service.
5.2 Positioning
Choice of location
Always install the appliance in a dry place
with satisfactory ventilation. Depending on
its climate class (stated on the nameplate
inside the refrigerator compartment), the
DANGER
• Non-compliance with these instructions
may result in death, fire or an electric
shock.
WARNING
• Plug into a grounded 3-prong outlet.
• Do not remove ground prong.
• Do not use an adapter plug.
• Do not use an extension cord.
• Do not twist or tie the power cord.
• Do not pull or bend the power cord.
• The appliance must be connected to
ground in compliance with electrical
system safety standards.
• Do not pull the cable to remove the plug.
• Do not damage the refrigerant circuit
WARNING
• Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
CAUTION
• Never use the open door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
door when open.
WARNING
Do not install this appliance:
• outdoor,
• in manufactured (mobile) homes, in
recreational vehicles (RVs) or boat.
• near a heater or flammable material.
Keep flammable materials and vapor,
such as gasoline, away from the
appliance.
• in a room where there is a risk of
freezing.
• in direct sunlight or exposed to heat from
stoves (if this is not possible, insulate
properly).
Loading ...
Loading ...