Loading ...
Loading ...
Loading ...
!
EN
99
! Turn on the dishwasher by holding the
"ON/OFF" button down for about 3 secs.
! Hold down the "Progr." and "ON/OFF"
buttons for about 5 secs.
! The message "SETTINGS" will appear
on the display and the indicator lights of
the "SMART DOOR/EXPRESS" and
"TABS" buttons will be on.
! Pressing the "Progr." button until the
"MEMO FUNCTION" parameter is
selected.
! Parameter adjustment is performed by
pressing the "SMART DOOR/EXPRESS"
(-) and "TABS" (+) buttons to
change the
value from "MEMO MODE ON"
to "MEMO
MODE OFF" and vice versa.
! Switch off the dishwasher by pressing the
"ON/OFF" button for 3 secs to confirm
the new setting.
To turn the alarm on again, follow the same
procedure.
Enabling
1. Turn on the appliance using the
ON/OFF button.
2. Press the Progr. and "START DELAY"
buttons together for 5 seconds.
3. "DEMO MODE ON" will appear on the
display.
4. If no button is pressed for 30 seconds,
the programme will start, simulating the
start of a wash programme.
Disabling "Demo mode"
1. Turn on the appliance using the On/Off
button.
2. Press the Progr. and "START DELAY"
buttons together for 5 seconds.
3. "DEMO MODE OFF" will appear on the
display.
4. Switch off the appliance.
The dishwasher has an electronic child lock
feature. The child lock protects children
against the dangers that can result if the
dishwasher door is opened, and disables
the controls to make sure no undesired or
accidental changes are made.
Turn the child lock feature on and off as
follows:
! Turn on the dishwasher by pressing the
"ON/OFF" button for about 3 sec.
!
Hold down the "SMART DOOR/EXPRESS"
and "START DELAY" buttons for about 5
seconds.
! "CHILD LOCK" will appear on the display.
Enabling or disabling DEMO MODE
(be used exclusively in stores)
The dishwasher must ALWAYS be off
before you start this procedure.
The Progr./Options/Start Delay options
are enabled, and by pressing these
buttons you can simulate the product's
functioning without starting a wash.
WARNING
Once installed, if the appliance works
correctly but the wash cycle does not
start upon pressing the Start button,
"Demo mode" may not have been
disabled.
The dishwasher must ALWAYS be off
before you start this procedure.
CHILD LOCK
Loading ...
Loading ...
Loading ...