Loading ...
Loading ...
Loading ...
Connections Connections
8
ENGLISH
Connecting a tape deck, CD recorder or MD recorder
R
L
AUDIO IN
R
L
AUDIO OUT
R
L
R
L
A
R
L
R
L
A
Tape deck/
CD recorder/
MD recorder
• The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono
cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate
MC head amplifier or step-up MC transformer.
NOTE:
• If humming or other noise is generated when the ground wire is connected to the SIGNAL GND
terminal, disconnect the ground wire.
Connecting a VCR
R
L
AUDIO OUT
R
L
AUDIO IN
VIDEO
IN
VIDEO
OUT
R
L
R
L
D
D
A
A
R
L
R
L
Video deck
An F-type FM antenna cable plug can be connected directly.
Connecting the antenna terminals
Direction of broadcasting
station
75 Ω/ohms Coaxial
cable
FM antenna
FM indoor antenna (Supplied)
AM loop antenna
(Supplied)
AM outdoor antenna
Ground
1
4
2
3
¢ AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the antenna on
top any stable
surface.
b. With the antenna
attached to a wall.
Mount
Installation hole Mount on wall, etc.
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.
Connection of AM antennas
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
ENGLISH
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
Loading ...
Loading ...
Loading ...