Loading ...
Loading ...
Loading ...
14
FB360 Folding Bike
Key Functions
BUTTONS
MODE - Push down for selecting functions.
SET - To Set the consumer movement of time, distance, calories and hand pulse.
RESET -For resetting consumer movement of time, distance, calories and hand pulse.
FUNCTIONS AND OPERATIONS
SCAN: Press the MODE button until SCAN appears, the monitor will rotate through the 6
functions: time, speed, distance, calorie, odometer, and pulse. Each display will be held 6
seconds.
TIME: Shows your elapsed workout time. Press the MODE button until “TIME” appears, press
SET button to set target time. When the target time is reached, the console will beep for 10
seconds.
SPEED: Display current speed.
DISTANCE: Count the distance from exercise start to end. The maximum value is 999.99
miles. Press the MODE button until “DISTANCE” appears, press SET button to set target
distance. When the target distance is reached, the console will beep for 10 seconds.
CALORIE: Count the total calories from exercise start to end. Press the MODE button
until “CALORIE” appears, press SET button to set target calories. When the caloric goal is
reached, the console will beep for 10 seconds.
ODOMETER: Monitor will display the total accumulated distance.
PULSE RATE: Press the MODE button until “PULSE” appears. Press SET button to set
target heart rate. The heart rate range can be set anywhere from 40 - 240 BPM. When the
target heart rate reached, the console will beep.
Before measuring your pulse rate, please place your palms of the hands on both of the
contact pads. The monitor will show your current heart rate in beats per minute(BPM) on the
LCD after 6~7 seconds.
During the process of pulse measurement, the measurement value may be higher than
the actual pulse rate during the rst 2~3 seconds of reading, after which it will stabilize and
display a more accurate reading. The heart rate measurement value is not intended to be and
should not be used as the basis for medical treatment.
NOTE
• If the display is faint or shows no gures, please replace the batteries.
• The monitor will automatically shut o if there is no signal received after 4 minutes.
Loading ...
Loading ...
Loading ...