Loading ...
Loading ...
Loading ...
64
Electric connection
Make sure that the mains voltage corresponds to the
specifications shown on the plate located on the back
of the appliance.
The plate must never be removed.
The plug at the end of the power supply cable and the
wall socket must be compatible and must comply
with current electric standards. Check that the mains
is adequately earthed. Once the appliance has been
installed make sure that the plug is accessible to
allow the periodical check-up.
The power supply cable should conform to country-
specific regulations.
Prepare an all-pole switch on the power supply line of
the appliance with a contact opening distance no
greater than 3 mm, located in a convenient position
near the appliance.
Do not use reducers, adapters or shunts.
Before making the electric connection, make sure of
the efficiency of the earthing.
Make sure that the safety valve and the domestic
installation are able to withstand the appliance load.
The yellow/green earth cable must not be inter-
rupted.
The electric cable must not come into contact with
parts whose temperature is more than 50 K above
room temperature.
• Remove the packaging and the protective film
• Degrease the part of the cooker to which the
adhesive tape will be applied
• Remove the protective film from the adhesive tape
•
Position the splashback on the hob
• Screw the fixing plates to the cooker (A)
• Screw the fixing plates to the splashback (B)
Loading ...
Loading ...
Loading ...