Loading ...
Loading ...
Loading ...
8
1
2.
DRAIN HOSE : FITTING
INSTRUCTIONS
To avod emptyng the water contaner after
each dryng cycle, the water can be dscharged
drectly to a waste water dran ppe (the same
dranage system as household snks). Water
Bye-Laws prohbt connecton to a surface
water dran. The waste water dran ppe should
be located adjacent to the tumble dryer.
The kt conssts of:1 hose and 1 tap.
WARNING! Switch off and remove the
tumble dryer plug from the electricity supply
before carrying out any work.
Fit the Hose as Follows:
1. Flp the machne
slowly to the rght
sde.
2. The waste water
ppe is situated at the
right-hand side of the
machine (see the
pcture). A grey hose
connects to the bridge
at the left hand sde of
the machne. Using
pliers, remove the
pipe retaining clip
from the bridge.
3. Pull the hose off the
bridge connection.
4. Attach the black
hose from the kit,
(using the connector
a n d p i p e c l i p s
supplied), to the hose
removed from the
bridge connection.
5. Connect the new
drain hose to the waste
Water pipe.
6. Once the machne s
n place, check the
bottom to ensure that
the new hose does not
kink when pushing the
tum b l e d r y er i nt o
position.
Connect to the mains
electricity supply.
2
3
4
5
6
Cauton: If the product s n dfferent sde,
wat at least 4 hours before swtchng on so
that the ol can flow back nto the
compressor. Falure to do ths could result
n damage to the compressor.
Loading ...
Loading ...
Loading ...