Loading ...
Loading ...
Loading ...
ENGLISH_index
8
• Install the product according to the instructions in the
installation manual.
Failure to install the product according to the instructions
in the installation manual can result in serious personal
injury or product damage.
• Be sure to have at least two people when installing the
product or adjusting the product’s height.
Attempting to perform installation or adjustments
personally may result in personal injury or damage to the
product.
• Make sure a wall is available prior to proceeding with
installation. Make use of the anchors and screws provided
with the product.
Use of any unauthorized anchors or screws may not
support the product's weight, which poses safety risks.
• When drilling in the wall for installation, be sure to use
drill bits and drills of the specied diameter. Follow the
instructions for the hole depth.
Drilling and installing the product in ways other than
specied in the installation manual may result in an
unstable installation and potential safety issues.
• Do not wipe the product with a wet towel or use any
heating equipment or humidier under the place where
the product is installed.
Liquid water or vapor may enter the product and excessive
heat may cause re, electric shock, or malfunction.
• Do not install the product near a re sprinkler or detector,
a place where vibration or shock may occur or near a high-
voltage wire or power source.
• Unplug the product’s power cord from the wall outlet
before installing.
Installing the product while the power cord is plugged in
may result in electric shock or re.
• Do not install the product with bare hands. Be sure to wear
work gloves.
Attempting installation without work gloves may cause
personal injury.
• Connect the product with the supplied cable. Use of an
unauthorized cable may result in damage by friction with
the wall. Make sure to use the supplied cable gender. (This
may vary by model.)
Before Installation
(Except for OLW480B)
• Do not use the product for any purpose other than installing the
TV on a wall.
• Avoid product damage and safety accidents caused by careless
installing or use of improper or unauthorized wall mount.
• Follow the instructions in the installation manual for a convenient
installation of the wall mount.
• Immediately discontinue installation and contact the service center
if you cannot fully understand the installation process.
Use a professional installer if any installation issues remain after
the inquiry.
• Installation of this product on a concrete wall or wood stud is
recommended. Installation of this product on other surfaces
(Dry wall, plywood, bricks, etc.) is not recommended. Improper
installation may result in the product falling.
• Install the product only on a vertical wall.
Do not install on a tilted wall that exceeds building standards or on
the heavily titled wall or ceiling.
LG is not responsible for problems caused by improper installation
of the product, e.g., heavily tilted walls and ceilings.
• Check the enclosed accessories before installation. We are not
responsible for any lost or damaged accessories after the inner
packaging is opened.
• When an infant or small child swallows the enclosed accessories,
various safety accidents such as choking may occur. Keep the
enclosed accessories out of the reach of infants and children.
• When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening the screws. Doing
so may damage the wall and product or reduce the rigidity or
performance of the product.
• Avoid installing a TV that exceeds the specied tensile load, and do
not allow any external force to be applied to the product.
• Avoid accidents by using work tools with care during installation.
Tools for Installation
• “+” shaped screwdriver (manual or electric) / level / drill / Ø 8 mm
drill bit for concrete or Ø 4 mm drill bit for steel
Loading ...
Loading ...
Loading ...