Loading ...
Loading ...
Loading ...
15
7. Adding Rinse Aid
Dispenser
For filling
To fill the Rinse Aid chamber, rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with a good quality Rinse Aid, then replace
and lock the cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.
The dosage setting is factory set to suit
most installations. If, after washing, you
notice cloudy spots, streaks or water marks
on your glassware, it may be necessary
increase the setting. To do so, remove the
cap and rotate the indicator arrow to a
higher setting then replace the cap . If the
glasses are smeared or there is foam present
on the bottom of the glass or the bottom of
the machine. Select a lower setting.
For refilling
Depending on the dosage setting and the
number of washes, the chamber may need
only to be topped up once per month
approximately. The rinse aid level can be
checked by two methods.
• By the indicator window on the dispenser
when the dishwasher door is fully open.
● Black indicates sufficient Rinse Aid
O
Clear indicates Rinse Aid required
• By the light on the control panel when the
dishwasher is working on.
Rinse Aid Information
Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
HOW TO USE AND OPERATE
When the lamp is lit, it means the rinse aid
is almost empty. Refill the Rinse Aid
chamber as soon as possible.
Loading ...
Loading ...
Loading ...