TURNING YOUR SPEAKER ON AND
OFF
• Press the button to turn your speaker ON
or OFF. The blue LED blinks quickly and the
speaker enters pairing mode.
CONNECTING WITH BLUETOOTH
1 Make sure that your Bluetooth device is
turned on and within 33 feet (10 meters) of
your speaker.
2 On your speaker, press the button. Your
speaker enters pairing mode, and the
Bluetooth LED blinks. Your speaker remains in
pairing mode for 30 seconds or until it pairs
with a Bluetooth device.
Note: Press and hold the button to return to
pairing mode.
3 Turn on your Bluetooth device and turn on
Bluetooth. Set your device to pairing mode,
then select NS-CSPBT02. See the instructions
that came with your Bluetooth device for
information about pairing.
4 If you are asked for a password, enter 0000.
When pairing is complete, the LED on your
speaker lights solid blue.
Quick Setup Guide
|
NS-CSPBT02-BL / NS-CSPBT02-GR / NS-CSPBT02-PK / NS-CSPBT02-PU
Bluetooth Speaker
CHARGING YOUR SPEAKER
1 Connect the small end of your charging cable
to the micro USB port underneath the cover
on your speaker.
2 Connect the other end to a USB charging port.
Note: When the battery is low, the LED blinks red
slowly. The speaker will have about 10 minutes of
battery life left.
Before using your new product, please read these instructions to prevent any damage.
Top view
Side view
PACKAGE CONTENTS
• Bluetooth speaker
• USB cable
• Quick Setup Guide
FEATURES
• Bluetooth streams music wirelessly
• Rechargeable battery lasts for up to six hours
• Use as a speakerphone, for hands-free
talking
• Built-in travel hook
• Splash-proof
LED
Blinks blue
slowly
Blinks blue
Solid blue
DESCRIPTION
Speaker is not
connected
Speaker is in pairing
mode
Speaker is paired
Travel hook
Power/pairing button
Volume up/down
button
Micro USB charging
port cover
Bottom of speaker
Your speaker loses
the Bluetooth
connection if you...
Turn o your speaker.
Move the Bluetooth
device out of range.
Turn o your Bluetooth
device.
Turn o Bluetooth on
your Bluetooth device.
Connect your Bluetooth
device to another
Bluetooth device.
To reconnect...
Turn on your speaker. Your speaker
searches for the last connected
Bluetooth device and reconnects.
Make sure that your Bluetooth
device is within 33 feet of your
speaker.
Turn on your Bluetooth device, then
make sure that Bluetooth is on.
Turn on Bluetooth on your Bluetooth
device.
Disconnect your Bluetooth device
from the other Bluetooth device,
then set your device to pairing
mode. Select “NS-CSPBT02” on your
Bluetooth device.
Microphone
LED
indicator
LED
Beep and blinks
red slowly
Solid red
Light turns o
DESCRIPTION
Low battery
Charging
Fully charged
5 To disconnect from the paired Bluetooth
device, press and hold the button on your
speaker for three seconds. Your speaker
disconnects from the Bluetooth device and
enters pairing mode again.
RECONNECTING TO A PAIRED
DEVICE
When your speaker is not paired to a device,
the LED blinks blue slowly.
Note: If a device does not automatically reconnect,
you may need to reselect “NS-CSPBT02” on your
Bluetooth device.
Loading ...