Subaru 2011 Legacy 3.6R Car

User Manual - Page 107

For 2011 LEGACY 3.6R.

PDF File Manual, 454 pages, Read Online | Download pdf file

2011 LEGACY 3.6R photo
Loading ...
Loading ...
Loading ...
Black plate (110,1)
Model "A2470BE-B" EDITED: 2010/ 9/ 21
2-16 Keys and doors
The alarm is triggered by:
. Opening a door, the rear gate or trunk
lid
. Physical impact to the vehicle, such as
forced entry (only models wi th shock
sensors (dealer option))
NOTE
The alarm system can be set to trigger
illumination of map lights and dome
light. The map lights and dome light
notification is deactivated as the fac-
tory setting. Refer to Function set-
tings F20. A SUBARU dealer can
activate the system. Contact your
SUBARU dealer for details.
& Activating and deactivating
the alarm system
To change the setting of your vehicles
alarm system for activation or deactiva-
tion, do the following.
1. Disarm the alarm system. Refer to
Disarming the system F2-18.
2. Sit in the drivers seat and shut all
doors (and the rear gate (Outback)).
3. Turn the ignition switch to the ON
position.
4. Hold down the REAR (UNLOCK) side
of the drivers power door locking switch,
open the drivers door within the following
1 second, and wait 10 seconds without
releasing the switch. The setting will then
be changed as follows:
If the system was previously activated:
The trip meter screen displays AL oF
and the horn sounds twice, indicating that
the system is now deactivated.
If the system was previously deacti-
vated:
The trip meter screen displays AL on and
the horn sounds once, indicating that the
system is now activated.
NOTE
You may have the above setting
change done by your SUBARU dealer.
& If you have accidentally trig-
gered the alarm system
! To stop the alarm
Perform any of the following operations.
. Press any button on the remote trans-
mitter.
. Turn the ignition switch to the ON
position.
& Arming the system
! To arm the system using remote
transmitter
1. Close all windows and the moonroof (if
equipped).
2. Remove the key from the ignition
switch.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood (and
the trunk lid (Legacy)) are locked.
5. Close all doors (and the rear gate
(Outback)).
: Press to Arm the system.
: Press to Disarm the system.
Loading ...
Loading ...
Loading ...