Loading ...
Loading ...
Loading ...
www.PyleUSA.com
IMPORTANT NOTES:
• Always select the appropriate level of training for your own personal fitness
• Clean the unit after each use with a damp cloth – do not use harsh or
abrasive cleaners
• Always inspect the unit for wear and tear after each use
• Ensure the switch on the control panel is turned off after each use and the
appliance is switched off and unplugged at the mains
• Store the product in a clean, dry place when not in use
ASSEMBLY
INSTRUCTIONS FOR ASSEMBLY
• Remove your product from the box taking care not to scratch the surface of
the machine.
• Remove any packaging from the product
• Place the packaging inside the box and store for future reference
• Feed the signal wire from the lower aluminium column into the branch
pipe of the base section (casing) and connect to the signal port
(see picture 1).
• Align the hole in the lower aluminium column with the hole in the branch
pipe of the base section (casing) and use and M6 x 40mm locknut to secure
in p lace (see picture 2).
• Place the armrest and control panel section onto the upper aluminium
column aligning the holes in both sections (see picture 3).
• Fix the armrest and control panel in place using the threaded rob (see
picture 4).
• Extend the upper aluminium column and secure in position using 2 x M6 x
40mm lock nuts and plastic gaskets (see picture 5).
3
Footplate
Upper
Aluminum
Column
Armrest
Control
Panel
Lower
Aluminum
Casing
Loading ...
Loading ...
Loading ...