Loading ...
Loading ...
Loading ...
6 7
How To Store
Your Vacuum
1. Choose a storage location that is
both safe and dry.
2. Depending on the space available,
you can choose to store it in an
upright or horizontal position using
the parking slots.
3. Be careful not to trap, twist or tie the
electrical cord. Wind it.
4. Keep the extension tubes, nozzles
and hose together to avoid
misplacing them.
Disposing Your Vacuum
PACKAGING MATERIAL
The packaging materials are
environmentally-friendly and can be
recycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<. Please dispose of the packaging
materials in the appropriate container at
the community waste disposal facilities.
OLD APPLIANCE
The symbol
on the appliance or its
packaging indicates that this product
may not be treated as household waste.
Instead, it should be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment.
By ensuring that this product is disposed
of correctly, you can help prevent
potential negative consequences for
the environment and human health.
For more detailed information about
recycling, please contact your local
city council.
• If necessary both the HEPA filter and
grey protection filter can be washed
under a tap with cold water. Always
wash the filter from the underside, do
not scrub of use cleaning agents on
the filter. Do not use a washing
machine to wash the filter.
• Air dry both the filters for 24 hours to
ensure it is completely dry before
reusing. Avoid direct sunlight or
extreme drying conditions. Do not
use hair dryer to dry the filters.
• Refit the grey protection filter by
aligning it with the dust container
and sitting it in place, then fit the
filter in frame by aligning the frame
with the dust container and simply
sliding it into place.
• When fitted correctly a safety device
will allow the dust container to fit
back into the dust container only if
the filter is properly installed. If dust
container do not fit into the dust
compartment do not force it and
check if filter is properly installed.
• If either of the filters appear damaged
do not re use them.
CHANGING THE EXHAUST FILTER
• Open the filter grill. Remove the
exhaust filter. Rinse it under tap
water and dry it completely. Put the
filter back into the cleaner. Close the
filter grill.
• Tap the filter face down on a flat
surface covered with a sheet
of paper. This will dislodge
excessive residue from the filter.
Dispose of the cover sheet with the
dust residue. Gently beat the grey
protection filter in an open air space
to properly dislodge any dust.
MAINTENANCE MAINTENANCE
Loading ...
Loading ...