Loading ...
Loading ...
Loading ...
4. Install screws, washers, and locknuts securing the main frame assembly to the upper and lower cross braces using an 8mm Allen
wrench and 17mm wrench.
Item Description Qty.
1 Main Frame Assembly 1
2 Upper Cross Brace 1
3 Lower Cross Brace 1
4 Washer, Flat 3/8" 8
5 Nut, M10 x 1.5, Hex Nylock 4
6 Screw, M10 x 1.5, 120mm 4
Hand tighten hardware.
5. Tighten the hardware to 20-25 (27.1-33.9 Nm).
Assemble Tower
1. Install the increment weight bumper to the bottom plate of the tower frame.
Item Description Qty.
1 Increment Weight Bumper 1
2 Tower Frame 1
Page 12 of 34
Loading ...
Loading ...
Loading ...