Loading ...
Loading ...
Loading ...
TRANSPORT/HANDLING
18 19
adequate for the machine’s 10 A Current Rating.
The electrical power cable must be replaced exclusively by a licensed electrician.
ELECTRICAL CONNECTION
Press the “On/Off ” button for 2 seconds for shutdown, open the door, put
in one or two towels, and then select the spin program to dry again.
AFTER-SALES SERVICE
If fault code “F13” is shown
Door lock is abnormal. Start program for 3 times to check whether the door is
closed.
Open or close it again.
After fault is removed, press “Start/Pause” key. If fault occurs again, disconnect
power supply and contact with after-sale service.
If fault code “F14” is shown
Door open fault.
Action: Press “Start/Pause” button. The washing machine will try to open the door.
The alarm will not be removed until the door is unlocked. Or, press the “On/Off”
button to restart the washing machine, and the alarm will be removed.
If fault code “F24” is shown
Water level reaches overflow level.
Remove it by pressing “Start/Pause ” button and
drain away water.
Select and start required program. If fault occurs again, disconnect power supply
and contact with after-sale service.
If else fault code “F04” to “F98” is shown
Electronic module fails.
Press the “On/off ” button for 2 seconds to turn off the machine.
After fault is removed, press “On/off ” button. If fault occurs again, disconnect
power supply and contact with after-sale service.
If fault code “Unb” is shown
Unbalance alarm shall be solved by the following methods.
1.Laundry winding.
Press the “On/Off ” button for 2 seconds for shutdown, open the door, shake
the clothes and put them back into the washing machine, then select the spin
program to dry again.
2.Too light-weighted laundry.
Spin
On/off