FE5.
6-6.3/200-600
GOSS
400
300
250 200
500
600
10m-2.4m
FULL 10m
400
300
250
500
600
10m-2.4m
∞-
FULL 10m
1 2
MODE
OPTICAL
STEADY SHOT
ON OFF
3
AF MF
1
7
14
16
15
3 5
4 6
2
10 12 13119
8
1718
19
21 20
400
300
250
500
600
10m-2.4m
AF MF
∞-
FULL 10m
1 2
MODE
OPTICAL
STEADY SHOT
ON OFF
3
10m-2.4m
∞-
FULL 10m
AF MF
–1
(1) (2)
–2
(1)
(3)
(2)
(1)
(1) (2)
(2)
400
300
250
500
600
400
300
250
500
600
電気製品は、安全のための注意事項を守らな
いと、人身への危害や火災などの財産への損
害を与えることがあります。
使用上のご注意
フラッシュ使用時のご注意
周辺光量について
各部のなまえ
レンズの取り付けかた／取りはず
しかた
取り付けかた（イラスト–参照）
1
レンズの前後レンズキャップとカメラのボ
ディキャップをはずす。
2
レンズとカメラの白の点（マウント標点）を
合わせてはめ込み、レンズを軽くカメラに押
し当てながら、時計方向に「カチッ」とロック
がかかるまでゆっくり回す。
取りはずしかた（イラスト–参照）
カメラのレンズ取りはずしボタンを押したま
ま、レンズを反時計方向に回してはずす。
三脚を使う
縦位置・横位置の変更
三脚台座の取りはずしかた/取り付けかた
取りはずしかた（イラスト（3）参照）
フォーカスレンジ（AF駆動範囲）を
切り替える
フォーカスレンジ切り替えスイッチで、撮影距
離範囲を選択する。
主な仕様
商品名
（型名）
FE 200-600mm
F5.6-6.3 G OSS
(SEL200600G)
焦点距離（mm）
200-600
焦点距離イメージ*
1
（mm）
300-900
レンズ群一枚
17-24
画角1*
2
12°30'-4°10'
画角2*
2
8°-2°40'
最短撮影距離*
3
（m）
2.4
最大撮影倍率（倍）
0.2
最小絞り
F32-F36
フィルター径（mm）
95
外形寸法（最大径×長さ）
（約：mm）
111.5×318
質量（約：g）（三脚台座別）
2,115
手ブレ補正機能
This instruction manual explains how to use
lenses. Precautions common to all lenses such
as notes on use are found in the separate
“Precautions before using”. Be sure to read both
documents before using your lens.
This lens is designed for Sony α camera system
E-mount cameras. You cannot use it on A-mount
cameras.
The FE 200-600mm F5.6-6.3 G OSS is compatible
with the range of a 35mm format image sensor.
A camera equipped with a 35mm format image
sensor can also be set to shoot at APS-C size.
For details on how to set your camera, refer to its
instruction manual.
For further information on compatibility, visit the
web site of Sony in your area, or consult your dealer
of Sony or local authorized service facility of Sony.
For Customers in the U.S.A.
For question regarding your product or for the Sony
Service Center nearest you,
call 1-800-222-SONY (7669) .
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : SEL200600G
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, CA 92127
U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Notes on Use
• Do not leave the lens exposed to the sun or a bright
light source. Internal malfunction of the camera body
and lens, smoke, or a fire may result due to the effect
of light focusing. If circumstances necessitate leaving
the lens in sunlight, be sure to attach the lens caps.
• When shooting against the sun, keep the sun
completely out of the angle of view. Otherwise, solar
rays may be concentrated at a focal point inside
the camera, causing smoke or a fire. Keeping the
sun slightly out of the angle of view may also cause
smoke or a fire.
• When carrying a camera with the lens attached,
always firmly hold both the camera and the lens.
• This lens is not water-proof, although designed with
dust-proofness and splash-proofness in mind. If using
in the rain etc., keep water drops away from the lens.
• While a camera with the lens attached is turned
off, the internal components of the lens may be
put in motion. This, however, does not indicate a
malfunction.
• When storing or carrying this lens, prevent it from
dropping. During shooting, use a sturdy tripod with it.
1
レンズをカメラから取りはずす。
2
台座固定ノブを反時計方向に回してゆるめ
る。
3
台座取りはずしレバーを押しながら、三 脚
台座を矢印の方向に取りはずす。
取り付けかた
1
三脚台座を三脚リングの取り付け部に「カ
チッ」というまで差し込む。
2
台座固定ノブを時計方向に止まるまで回し
て三脚台座を固定する。
レンズストラップを取り付ける
レンズフードを取り付ける
レンズフードの赤線をレンズの赤線（レンズ
フード指標）に合わせてはめ込み、レンズフード
の赤点とレンズの赤線が合って「カチッ」という
まで時計方向に回す（1）。
ズームする
ズームリングを回して、希望の焦点距離（ズーム
の位置）に合わせる。
ピントを合わせる
AF（オートフォーカス）／ MF（マニュアル
フォーカス）の切り替え
レンズ側の設定
フォーカスモードスイッチを、AFまたはMFの
いずれか設定したいほうに合わせる（1）。
AF/MFコントロールボタンを装備したカメラをお
使いの場合
手ブレ補正を使用する
手ブレ補正スイッチ
手ブレ補正モードスイッチ
フォーカスホールドボタンを使用
する
Precautions on using a flash
• You cannot use a built-in camera flash with this lens.
Vignetting
• When using the lens, the corners of the screen
become darker than the center. To reduce this
phenomena (called vignetting), close the aperture by
1 to 2 stops.
Identifying the Parts
1 Lens hood index 2 Zooming ring
3 Focal-length index (gray) 4 Focusing ring
5 Tripod collar ring index (gray) 6 Lens contacts*
7 Tripod collar ring 8 Focus-hold button
9 Focal-length scale 10 Tripod collar ring index (gray)
11 Tripod collar ring-locking knob
12 Focus-mode switch 13 Focus-range limiter
14 Lens mounting index 15 Lens mount rubber ring
16 SteadyShot switch 17 SteadyShot mode switch
18 Tripod collar (detachable) 19 Lens hood
20 Tripod collar release lever
21 Tripod collar-locking knob
* Do not touch the lens contacts.
Attaching/Detaching the Lens
To attach the lens
(See illustration –)
1
Remove the rear and front lens caps and
the camera body cap.
• You can attach/detach the front lens cap in two
ways, (1) and (2). When you attach/detach the lens
cap with the lens hood attached, use method (2).
2
Align the white dot on the lens barrel
with the white dot on the camera
(mounting index), then insert the lens
into the camera mount and rotate it
clockwise until it locks.
• Do not press the lens release button on the
camera when mounting the lens.
• Do not mount the lens at an angle.
To remove the lens
(See illustration –)
While holding down the lens release button on
the camera, rotate the lens counterclockwise
until it stops, then detach the lens.
Using the Tripod
When using a tripod, attach it to the tripod collar of
the lens, not to the tripod receptacle of the camera.
To change vertical/horizontal
position
Loosen the tripod collar ring-locking knob on
the tripod collar (1) and rotate the camera either
direction. The camera can be quickly switched
between vertical and horizontal positions while
maintaining stability when using a tripod.
• Gray dots (tripod collar ring indexes) are located at
90° intervals on the collar ring. Align a gray dot on
the tripod collar ring with the gray dot (tripod collar
ring index) on the lens to adjust the camera position
precisely (2).
• Tighten the tripod collar-locking knob firmly after the
camera position is set.
• The tripod collar ring may hit the camera body or
accessory when rotated, depending on the camera
or accessory model. For more information on
compatibility with cameras and accessories, visit the
web site of Sony for your area.
Detaching and attaching the tripod
collar
Detaching the tripod collar
(See illustration (3))
The tripod collar can be detached from the lens
when not using a tripod.
1
Remove the lens from the camera.
• See “ Attaching/Detaching the Lens” for
details.
2
Rotate the tripod collar-locking knob
counterclockwise to loosen it .
3
While pressing the tripod collar release
lever , detach the tripod collar in the
direction of the arrow .
• If you detach the tripod collar without removing
the lens from the camera, the tripod collar may hit
the camera body or accessory. We recommend you
remove the lens from the camera before detaching
the tripod collar.
• When removing the tripod collar from the tripod collar
ring, the tripod screw holes become exposed on the
tripod collar ring. Do not attach a tripod or monopod
to the tripod screw hole. If you do that, you will
damage the screw hole. Then you will not be able to
attach the tripod collar to the tripod collar ring.
Attaching the tripod collar
1
Slide the tripod collar to the mount of the
tripod collar ring until it clicks.
2
Rotate the tripod collar-locking knob
clockwise firmly to set it.
• Be sure that the tripod collar-locking knob is set
firmly. If the tripod collar-locking knob is not set
firmly, the lens may fall off the tripod collar.
Attaching the lens strap
Before carrying around the lens, attach the lens
strap to the lens.
• To prevent the lens from dropping, be sure to attach
the lens strap properly so that the lens strap will not
come loose from the lens.
• When carrying around the camera with the lens
attached, be sure to grasp the lens strap on the lens,
not the one on the camera.
Attaching the Lens Hood
It is recommended that you use a lens hood to
reduce flare and ensure maximum image quality.
(Suite à la page arrière)
Align the red line on the lens hood with the
red line on the lens (lens hood index), then
insert the lens hood into the lens mount and
rotate it clockwise until it clicks into place
and the red dot on the lens hood is aligned
with the red line on the lens (lens hood
index) (1).
• When using an external flash (sold separately), remove
the lens hood to avoid blocking the flash light.
• When storing, fit the lens hood onto the lens
backwards (2).
Zooming
Rotate the zooming ring to the desired focal
length.
Focusing
• The focus-mode switch of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
To switch AF (auto focus)/MF
(manual focus)
The focus mode can be switched between AF and
MF on the lens.
For AF photography, both the camera and lens
should be set to AF. For MF photography, either or
both the camera or lens should be set to MF.
To set the focus mode on the lens
Slide the focus-mode switch to the
appropriate mode, AF or MF (1).
• Refer to the camera manuals to set the focus mode of
the camera.
• In MF, turn the focusing ring to adjust the focus (2)
while looking through the viewfinder, etc.
To use a camera equipped with an AF/MF
control button
• By pressing the AF/MF control button during AF
operation, you can temporarily switch to MF.
• Pressing the AF/MF control button during MF
operation lets you temporarily switch to AF if the lens
is set to AF and the camera to MF.
Using SteadyShot
SteadyShot switch
• ON: Compensate for camera shake.
• OFF: Does not compensate for camera shake. We
recommend setting the SteadyShot switch to
OFF when shooting with a tripod.
SteadyShot mode switch
Set the SteadyShot switch to ON, and set the
SteadyShot mode switch.
• MODE1: Compensate for normal camera shake.
• MODE2: Compensate for camera shake when panning
moving subjects.
• MODE3: Compensate for camera shake to minimize
framing disturbances. This helps you to keep
up with fast and irregularly moving subjects
for photography, for example, in sports games.
Using focus-hold buttons
• The focus-hold button of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
This lens has 3 focus-hold buttons.
Press the focus-hold button in AF to cancel AF.
The focus is fixed and you can release the shutter
on the fixed focus. Release the focus-hold button
while pressing the shutter button halfway to start
AF again.
Switching Focus Range
(AF range)
The focus-range limiter enables you to reduce the
AF time. This is useful when the subject distance is
definite.
Slide the focus-range limiter to select the
focus range.
• FULL: You can adjust the focus from the
minimum focusing distance to infinity.
• 10m-2.4m: You can adjust the focus from 10 m
(32.81feet) to 2.4 m (7.88feet).
• ∞-10m: You can adjust the focus from 10 m
(32.81feet) to infinity.
Specifications
Name (Model name)
FE 200-600mm
F5.6-6.3 G OSS
(SEL200600G)
Focal length (mm) 200-600
35mm equivalent
focal length*
1
(mm)
300-900
Lens groups-elements 17-24
Angle of view 1*
2
12°30'-4°10'
Angle of view 2*
2
8°-2°40'
Minimum focus*
3
(m (feet)) 2.4 (7.88)
Maximum magnification (×) 0.2
Minimum aperture F32-F36
Filter diameter (mm) 95
Dimensions
(maximum diameter × height)
(approx., mm (in.))
111.5×318
(4 1/2×12 5/8)
Mass (approx., g (oz.))
(excluding tripod collar)
2,115 (74.7)
SteadyShot Yes
For further information on compatibility with the
tele converter (sold separately) and specifications
used with the tele converter, visit the web site of
Sony in your area, or consult your dealer of Sony or
local authorized service facility of Sony.
*
1
This is the equivalent focal length in 35mm format
when mounted on an Interchangeable Lens Digital
Camera equipped with an APS-C sized image sensor.
*
2
Angle of view 1 is the value for 35mm cameras, and
angle of view 2 is the value for Interchangeable Lens
Digital Cameras equipped with an APS-C sized image
sensor.
*
3
Minimum focus is the distance from the image
sensor to the subject.
• Depending on the lens mechanism, the focal length
may change with any change in shooting distance.
The focal lengths given above assume the lens is
focused at infinity.
Included items
(The number in parentheses indicates the number
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1), Tripod
collar (1), Lens hood (1), Lens case (1), Lens strap (1),
Set of printed documentation
Designs and specifications are subject to change
without notice.
and are trademarks of Sony Corporation.
Cette notice explique comment se servir des
objectifs. Les précautions communes à tous
les objectifs, par exemple les remarques sur
l’emploi, se trouvent sur la feuille « Précautions
avant toute utilisation ». Veuillez lire les deux
documents avant d’utiliser votre objectif.
Votre objectif est conçu pour les appareils photo à
monture E de type Sony α. Il ne peut pas être utilisé
pour les appareils photo à monture A.
Le FE 200-600mm F5.6-6.3 G OSS est compatible
avec la plage d’un capteur d’image de format
35mm.
Un appareil photo équipé d’un capteur d’image de
format 35 mm peut être réglé pour la prise de vue
en APS-C.
Pour les détails sur la manière de régler l’appareil
photo, reportez-vous à son mode d’emploi.
Pour plus d’informations sur la compatibilité,
consultez le site de Sony de votre pays, ou
adressez-vous à un revendeur Sony ou à un service
après-vente agréé Sony.
Remarques sur l’emploi
• Ne laissez pas la lentille orientée vers le soleil ou une
source de lumière intense. Cela risque de provoquer
un problème de fonctionnement interne du boîtier
de l’appareil photo et de l’objectif, de dégager de la
fumée, voire de provoquer un incendie. Si toutefois
vous ne pouvez pas faire autrement, veillez à fixer les
capuchons sur l’objectif.
• Lors d'une prise de vue en direction du soleil, veillez
à ce que le soleil ne soit pas dans l'angle de vue.
Dans le cas contraire, les rayons solaires peuvent être
concentrés vers le point focal dans l'appareil photo,
et provoquer un incendie ou dégager de la fumée.
Vous pouvez provoquer un incendie ou dégager de la
fumée même si le soleil est légèrement en dehors de
l'angle de vue.
• Lorsque vous portez un appareil photo avec l’objectif
dessus, tenez toujours fermement l’appareil photo et
l’objectif.
• Cet objectif n’est pas étanche à l’eau bien qu’il
soit conçu pour résister à la poussière et aux
éclaboussures. Si vous l’utilisez sous la pluie, etc.
veillez à ce que de l’eau ne tombe pas dessus.
• Lorsque l’appareil photo sur lequel l’objectif est
installé est hors tension, les composants internes de
l’objectif peuvent s’activer. Toufefois, ce phénomène
n’indique en aucune manière un dysfonctionnement.
• Évitez de faire tomber cet objectif lors de son
rangement ou de son transport. Pendant une prise de
vue, utilisez cet objectif sur un trépied robuste.
Précautions concernant l’emploi d’un flash
• Vous ne pouvez pas utiliser le flash de votre appareil
photo avec cet objectif.
Vignetage
• Lorsque l’objectif est utilisé, les coins de l’écran
deviennent plus sombres que le centre. Pour réduire
ce phénomène (appelé vignetage), fermez l’ouverture
de 1 ou 2 crans.
Identification des éléments
1 Repère de pare-soleil 2 Bague de zoom
3 Repère de focale (gris) 4 Bague de mise au point
5 Repère de collier de pied (gris)
6 Contacts d’objectif* 7 Collier de pied
8 Bouton de maintien de la mise au point
9 Échelle de focale
10 Repère de collier de pied (gris)
11 Molette de blocage du collier de pied
12 Commutateur de mode de mise au point
13 Limiteur de plage de mise au point
14 Repère de montage de l’objectif
15 Bague en caoutchouc de montage de l’objectif
16 Commutateur SteadyShot
17 Commutateur du mode SteadyShot
18 Pied (amovible) 19 Pare-soleil
20 Levier de libération du pied
21 Molette de blocage du pied
* Ne touchez pas les contacts d’objectif.
Pose et dépose de l’objectif
Pour poser l’objectif
(Voir l’illustration –)
1
Déposez les capuchons d’objectif arrière
et avant et le capuchon de l’appareil
photo.
• Vous pouvez poser et déposer le capuchon
d’objectif avant de deux façons, (1) et (2). Si vous
posez ou déposez le capuchon d’objectif avec le
parasoleil, utilisez la méthode (2).
5-003-565-01(1)
SEL200600G
交換レンズ
Interchangeable Lens
Objectif interchangeable
取扱説明書
Operating Instructions
Mode d’emploi
Manual de instrucciones
E-mount
©2019 Sony Corporation
Printed in China
FE 200-600mm
F5.6-6.3 G OSS
Loading ...
